Steel Thunder Custom Cycles motorcycle parts

 

Shopping Pages:

Control Section:

Brakes, discs, rotors, dashes & instrument panels, gauge brackets, footpegs, forward controls, grips, throttle control, handlebar controls, handlebars, levers, linkage, levers, mirrors, risers, shift & jockey control.

Drivetrain Section:

Belt drives, belt drive covers, clutch kits, chain drives, drivetrain packages, kick start transmission, offset sprockets, points, derby & ignition coves, primary belts, primary chains, primary covers, pulley & brake combo kit, rear drive belts, Sportster performance parts, six speed conversion, rear sprockets, rotors, transmissions & parts.

Electrical Section:

Battery related, battery tenders, charging systems,coils & mounts, dash/instrument panels, speedos, tachs, terminal kits, electronic ignitions, handlebar switches, headlights, horns, lighted license plate mounts, lighting, starter motors, taillights, turn signals, wiring harnesses.

Engine Section:

Motorcycle engine parts, drivetrain packages, cams & cam side parts, big bore kits, big bore piston kits, Sportster engine parts, motor mounts, drivetrain section, engine mounts.

Exhaust Section:

Exhaust pipes listed by model, exhaust accessories, insulating wrap, mufflers, extensions, high heat spray, heat shields, clamps and mounts.

Frame/Body Section:

Frames listed by style, engine mounts, fenders, struts, floorboards, foot rests, pegs, frame covers, hardtails, highway bars, kickstands, lowering kits, seats listed by model, shocks, sissy bars & pads, swingarms.. Also, Rolling Chassis Kits.

Front End Section:

Complete front fork assemblies, fairings & fairing accessories, fork brackets/triple trees, fork tubes, sliders, fork legs, boots, springer front ends & parts, wide glide kits.

Fuel Section (Gas, Oil, Air):

Air cleaners & covers, breathers, carburetors & rebuild kits, fuel injection control, gas tanks, gas caps, gas tank cleaner/prep systems, oil, oil coolers, oil line kits, oil pressure & tank gauges, oil pumps, oil tanks, , velocity stacks.

Saddlebag & Windshield Section:

Saddlebags listed by manufacturer, windshields

Wheel Section

Tires,  tire size chart, 40, 60 & 80 spoke wheels, solid wheels.

General Merchandise Section:

Catalogs, covers, gift certificates, gift suggestions, goggles & eyewear, hardware, luggage racks, motors, motorcycle covers, security, locks & alarms, tools, trailer accessories, ramps, wheel chocks, trailer hitches to put on motorcycle.

Other Pages:

Fun, Photos & Links Section:

Photos of our customer's motorcycles, including bike kit builds, trike build link, free biker ecards, jokes, banner links, text links, link to us, webmaster's awards.

Tech & Info Section

Tech tips, tire size chart, engine break-in, suspension & shocks info, rake and trail calculator, contact page, frequently asked questions (FAQ), our credentails, terms & conditions of sale, disclaimer, international shipping policy.

Secured by SSL - an authentic COMOCO site.

 

link

 

 

 

SPORTY883

NEW FLAT RATE SHIPPING!  No hidden fees and NO TAX! Only $12.95 in the continental. U.S., no matter how large (or heavy) your order is!  Save $$$ ... order everything you need NOW! 

Announcing NEW HOURS:  Starting Monday July 28th, we will be open Wednesday thru Sunday 10 - 6.
Sitemap and Search Home Page Contact Us Sportster Section Catalogs

WIRE HARNESS KITS

Handlebar wiring harnesses are on Handlebar Controls page.

NOTE: Electrical items are not returnable 

Complete harness for FXST.

COMPLETE WIRING HARNESS KITS FOR FXST - Made in U.S.A.


Great for restoring, repairing or building from scratch.
All wire colors, wire lengths and connectors are the same as OEM.
Main harness kits are designed for the frame wiring only.
Complete harness kits include wiring for handlebar switches, dash and rear light wiring.
Starter and battery cables not included.

Part#:M12059 - Complete Harness. Fits FXST 1989/1990 ... $194.48

Part#:M12061 - Complete Harness. Fits FXST 1993/1995 ... $195.78

Main harness kit for FLH, FXE.

MAIN WIRING HARNESS KITS FOR FLH - Made in U.S.A.

Great for restoring, repairing or building from scratch.
All wire colors, wire lengths and connectors are the same as OEM.
Main harness kits are designed for the frame wiring only.
Complete harness kits include wiring for handlebar switches, dash and rear light wiring.
Starter and battery cables not included.

Part#:M12057 - Main Harness. Fits FLH 1973/1977 ... $82.50

Wire Plus Twin Cam Engine Controller Harness for two plug module.

TWIN CAM ENGINE CONTROLLER HARNESS -
Wire Plus


Twin Cam wiring system with pre-assembled
ignition harness that provides all sensor wires required by stock and after market ignition modules that have the 2 12 pin Deutsch connectors (black and grey).

Plugs for ignition module, MAP sensor, Crank sensor, bank Sngle sensor, Ignition Coil and Data Link are included.

Includes wires for service engine light and tachometer.

Part#:M17518 - TC Engine Controller Harness ... $129.99

WIRE HARNESS KITS FOR CUSTOM USE - WP - Made in U.S.A.

Wire Plus Wire harness kits for custom use.Wiring up your custom motorcycle can be one of the most frustrating steps involved when building a bike from scratch. Now you can simplify the work and keep all of the main components in a compact water tight module. We offer a variety of mounting styles and module types, so you're certain to find one with the features that will meet your needs. Wires complete motorcycle.

Features of all Wire Plus Kits:
50" color coded main wire harness.
Easy to follow simplified wiring diagrams and instructions.
All necessary connectors, terminals and heat shrink tubing are included for a professional job.
All modules are Epoxy filled and are 100% waterproof making them vibration resistant and corrosion free.
Can be used without auto cancel turn signals, with WirePlus timed turn signals auto cancel 15138 or with HD auto turn signal cancel module.
6 troubleshooting LED lights "smartlights" that diagnose circuits and show green when active and red when circuit is overloaded or shorted.
Replaceable main 30 amp breaker and starter relay (which are readily available).
Individual circuits feature solid state breakers (that never need changing).
Use with dash ignition switch or FX/XL style switch.
System allows easy installation, access and maintenance of the electrical system.

SEE CHOICES BELOW:

WIRE PLUS KIT

Wire harness kit for custom use, choice of flatsie fat bob gas tank mount or Universal mid-frame mount.

Plus Wire harness kit.

WIRE HARNESS KITS FOR CUSTOM USE - WP - Made in U.S.A.

Fits 12 volt models (except EFI & TC 88). Remote breaker style. Remote 30 amp replaceable breaker. 1.170" wide x 3.740" long x 2.160" tall overall dimensions.
Smaller size allows for these units to be used on early model custom bikes.
Capable of being covered with 14212 billet lid when the module is installed in view.

Now includes lighting control module.

Part# M12069 - Flatside Fat Bob gas tank mount. Fits under ignition switch between tanks ... $399.99

WIRE PLUS KIT

Engine Mount Module

Regular & Chopper styles

NOW IN BLACK!

Wire Harness kit with engine mount modules from Wire Plus.

Engine mount module shown installed on FXR motor mount.

Wire harness kit comes in black or chrome.

WIRE HARNESS KITS WITH MODULE MOUNTS FOR CUSTOM USE - Wire Plus - Made in U.S.A.

Choose Chrome Plated or Black, Simplified Wiring.
12 Volt System.
50"color coded Main Wire Harness.
Incorporates horn, high-low, starter and turn signal functions.
Includes FX/XL style flat key ignition switch.
Easy to follow simplified wiring diagrams and instructions.
All necessary connectors, terminals and heat shrink tubing are included for a professional job.
All modules are Epoxy filled and are 100% waterproof making them vibration resistant and corrosion-free.
Can be used with Auto Cancel #MU15138 (see below) or with HD Auto Turn Signal Cancel Module.
6 troubleshooting LED lights "smartlights" that diagnose circuitsand show green when active and red when the circuit is overloaded or shorted.
Replaceable starter relay.
Replaceable remote mounted 30 amp circuit breaker.
Individual circuits feature solid state breakers (that never need changing.
System allows easy installation, access and maintenance of the electrical system.

Engine Mount Module. Mounting holes on 2" centers.
Measure 4.500" wdie x 2.250" long x 3.375" tall.
Designed for FXR type top motor mount. Use M15138 (lower on this page) for timed turn signal auto cancel.

Part#:M12015 - Chrome, use with 1982/Later OE (original equipment) style Handlebar Switches ... $499.99

Part#:M12025 - Black, use with 1982/Later OE style Handlebar Switches ... $599.95

Part#:M12016 - Chrome, use with 1972/1981 Button style switches, our MU15100 early style switches, or custom momentary type switches. ... $499.99

Part#:M12026 - Black, use with 1972/1981 Button style switches, our MU15100 early style switches, or custom momentary type switches. ... $599.99

12-volt wire harness kit for custom motorcycle use, from Wire Plus.

Main Harness for wiring kit designed for bobber or chopper style bikes.

Module features billet aluminum cover.

NEW!  GREAT FOR BOBBERS!

12-VOLT WIRE HARNESS KITS FOR CUSTOM USE - Wire Plus

Designed for Bobber or Chopper style bikes with a small oil tank and spring mounted solo seat with no place to hide anything.
The module is a mere 2" long x 1 7/8" wide x 1" tall and can be mounted anywhere in the oil tank area.
The module features a billet aluminum cover (for visible mounting) with holes for viewing the diagnostic LED lights.
The main harness includes everything needed for a "bare bones" wire job, but extra wire, heat shrink and terminals are included (as shown in additional images) for turn signals and indicator lights.

Part#:M12002 - Harness Kit for use with OE type Handlebar Switches ... $389.99

Part#:M12003 - Harness Kit for Minimal System Switches ... $299.99 including shipping*

#M15138

Self cancelling turn signal module for use with harness kits with modules above.

Self canceling turn signal module with load equalizer.

SELF CANCELING TURN SIGNAL MODULE WITH LOAD EQUALIZER FOR BIG TWIN AND SPORTSTER

" WIRE PLUS" This 12 volt sold state module provides two specific functions, timed self cancelling and load equalization. By pushing the turn signal button, the self cancelling function will operate the signal for 10 seconds and then turn off automatically. Pushing the button again will cancel the timing process. By pushing the other side's turn signal button, the timing process will be cancelled on one side and started on the other side. The second function of this module is its ability to equalize the load without producing any unnecessary heat. This will allow you to run any wattage combination of turn signal draw from single low draw LED cluster style bulbs up to high draw 60 watt bulbs. This module also allows for the use of front only or rear only turn signals. It does not require the OEM speedometer reed switch and does not support the four way flasher function. Module measures 3" long x 1.5" wide x .75" tall and includes instructions.

Fits all motorcycles with 12 volt turn signals. Will also replace the OEM turn signal module on Big Twin 1989/2000 and Sportster 1991/2003.

Part#:M15138 ... $99.99

Winged ignition switch housing for custom use, without switches.

Winged ignition switch housing with two concealed push button switches.

Winged Switch Housing shown with MU15010 ignition switch.

WINGED IGNITION SWITCH HOUSINGS FOR CUSTOM USE - Wire Plus

Chrome Plated.
Designed to provide a convenient location for the ignition/headlight switch when a one-piece gas tank is installed without a dash panel to mount the switch to.
Mounts on 2" centers and requires our 15010 late model Fat Bob Style Switch (HD# 71313-96A) found in Electric Section.
Housing is easy to install if used with a FXR (Evolution) type Top Engine Mount.
CNC machined for billet aluminum.
Measures 5 1/8" long x 1 1/8" wide x 2 11/16" tall.
Instructions included.

Part#:M13312 - Housing with two Concealed Push Button Switches; Switch for High/Low Function & Switch that can be used for Starter or Horn. Switches are high-quality self-cleaning waterproof units ... $179.99

Part#:M13311 - Housing without Switches, Has Provisions for a 1/2" O.D. Switch & a 5/8" O.D. Switch if required ... $99.99

Handlebar wiring harnesses are on Handlebar Controls page.

Coils & Mounts - - Electronic Ignitions & Modules - - Digital Speedos

Electrical Section Index - - Site Map - - Catalogs

 

Don't see what you need?  Contact us.  Chances are we have it.  We have thousands of parts that are not shown online.

15 Percent Coupon, summer promo, Beer Machine

FLAT RATE SHIPPING APPLIES IN CONTINTENTAL 48 UNITED STATES ONLY. AK, HI and APO/FPO will have additional shipping fees. We ship within the U.S.A. and to APO/FPO (military addresses; weight and size restrictions apply.). We do not accept foreign credit cards. Please see our CONTACT page for more information.

Prefer to call in your order to Steel Thunder? Call 603-237-8200.

FREQUENTLY ASKED QUESTIONS

Please note that all prices are subject to change.

***

Steel Thunder Custom Cycles

531 Bungy Road

Columbia, NH 03576

Copyright 2002-2013 Steel Thunder Custom Cycles©

 

Thank you for shopping at Steel Thunder Custom Cycles online motorcycle parts store!

 

 

 

Protected by Copyscape Duplicate Content Detection Software