Steel Thunder Custom Cycles motorcycle parts

 

Shopping Pages:

Control Section:

Brakes, discs, rotors, dashes & instrument panels, gauge brackets, footpegs, forward controls, grips, throttle control, handlebar controls, handlebars, levers, linkage, levers, mirrors, risers, shift & jockey control.

Drivetrain Section:

Belt drives, belt drive covers, clutch kits, chain drives, drivetrain packages, kick start transmission, offset sprockets, points, derby & ignition coves, primary belts, primary chains, primary covers, pulley & brake combo kit, rear drive belts, Sportster performance parts, six speed conversion, rear sprockets, rotors, transmissions & parts.

Electrical Section:

Battery related, battery tenders, charging systems,coils & mounts, dash/instrument panels, speedos, tachs, terminal kits, electronic ignitions, handlebar switches, headlights, horns, lighted license plate mounts, lighting, starter motors, taillights, turn signals, wiring harnesses.

Engine Section:

Motorcycle engine parts, drivetrain packages, cams & cam side parts, big bore kits, big bore piston kits, Sportster engine parts, motor mounts, drivetrain section, engine mounts.

Exhaust Section:

Exhaust pipes listed by model, exhaust accessories, insulating wrap, mufflers, extensions, high heat spray, heat shields, clamps and mounts.

Frame/Body Section:

Frames listed by style, engine mounts, fenders, struts, floorboards, foot rests, pegs, frame covers, hardtails, highway bars, kickstands, lowering kits, seats listed by model, shocks, sissy bars & pads, swingarms.. Also, Rolling Chassis Kits.

Front End Section:

Complete front fork assemblies, fairings & fairing accessories, fork brackets/triple trees, fork tubes, sliders, fork legs, boots, springer front ends & parts, wide glide kits.

Fuel Section (Gas, Oil, Air):

Air cleaners & covers, breathers, carburetors & rebuild kits, fuel injection control, gas tanks, gas caps, gas tank cleaner/prep systems, oil, oil coolers, oil line kits, oil pressure & tank gauges, oil pumps, oil tanks, , velocity stacks.

Saddlebag & Windshield Section:

Saddlebags listed by manufacturer, windshields

Wheel Section

Tires,  tire size chart, 40, 60 & 80 spoke wheels, solid wheels.

General Merchandise Section:

Catalogs, covers, gift certificates, gift suggestions, goggles & eyewear, hardware, luggage racks, motors, motorcycle covers, security, locks & alarms, tools, trailer accessories, ramps, wheel chocks, trailer hitches to put on motorcycle.

Other Pages:

Fun, Photos & Links Section:

Photos of our customer's motorcycles, including bike kit builds, trike build link, free biker ecards, jokes, banner links, text links, link to us, webmaster's awards.

Tech & Info Section

Tech tips, tire size chart, engine break-in, suspension & shocks info, rake and trail calculator, contact page, frequently asked questions (FAQ), our credentails, terms & conditions of sale, disclaimer, international shipping policy.

Secured by SSL - an authentic COMOCO site.

 

link

 

 

 

NEW FLAT RATE SHIPPING!  No hidden fees and NO TAX! Only $12.95 in the continental. U.S., no matter how large (or heavy) your order is!  Save $$$ ... order everything you need NOW! 

Sitemap and Search Home Page Contact Us Sportster Section Catalogs

Shock Absorbers for Sportsters/XL models

Sportster Page & Index 

Progressive Suspension shocks for Sportsters.

Progressive Suspension

STEEL BODY SHOCK ABSORBERS - from Progressive Suspension
CHROME PLATED
Multistage velocity sensitive internal valving, double walled steel bodies and precision ground hardened steel shafts for fade free operation with a consistent ride over a variety of surfaces and extended seal life. Spring pre-load is easily set with a cam type adjuster. Shock length is measured from center of eye to center of eye (always verify existing shock length before ordering). Includes a spring pre-load adjusting tool. Instructions are included. Sold in pairs.

Style D:Dual Covers with Offset Lower Mount. Fits FXR 1982/Later and Sportster 1979/2003. Flat rate shipping, $12.95 per order.

Part Number Length Price Buy Now
M29050 11.5 inches $270.52
M29052 12.5 inches $281.79

Steel body shock absorbers from Progressive Suspension.  Shocks for Sporsters.

Progressive Suspension

STEEL BODY SHOCK ABSORBERS - Progressive Suspension
CHROME PLATED
Multistage velocity sensitive internal valving, double walled steel bodies and precision ground hardened steel shafts for fade free operation with a consistent ride over a variety of surfaces and extended seal life. Spring pre-load is easily set with a cam type adjuster. Shock length is measured from center of eye to center of eye (always verify existing shock length before ordering). Includes a spring pre-load adjusting tool. Instructions are included. Sold in pairs.

Length: 11 inches Style C: Dual Covers with Offset Lower Mount
Fits FXR 1982/Later and Sportster 1979/2003.
Part#:M29048 - Length: 11 inches ... $281.79

Chrome Sportster Shocks.
CHROME PLATED SHOCK ABSORBERS FOR SPORTSTER - V-Factor

High Quality which meets or exceeds OEM Specifications.
Can be adjusted to three different spring loads.
Made to fit 1/2" mounting studs.
Sold in Pairs. Chrome Plated.

Fits Sportster 1975/1978.  14" Eye to Eye Shock. Without covers. (Replaces HD 54504-75)
Part#:  M29017 ... $108.60

Burly Slammer Suspension lowering drop kit for Sportser XL motorcycles.

SLAMMER SUSPENSION DROP KITS FOR SPORTSTER - Burly Brand

Go from stock to slammed in about one hour!
The Slammer is a complete lowering kit in one box.
No disassembly of forks required, they can stay on the bike while you work!
No special tools needed for installation.
The shocks included in the kit lower the rear up to 2 1/2" and the fork springs lower the front up to 2".
Kit includes two 10 1/2" shock absorbers, two Slammer fork springs, two helper springs, two spring spacers, one spanner wrench, one lube packet, and complete installation instructions.
Made in the U.S.A.

Part#: M36540 - Fits Sportster 1988/2003 ...$319.80

Part#: M36541 - Fits Sportster 2004/Later...$319.80

Rear lowering block kits for Sportster.  Chrome or black.

MU29228

REAR LOWERING BLOCK KITS SPORTSTER

Reduces the rear ride height by repositioning the lower shock mount further back. More economical that buying shorter rear shocks. Easy to install.
Includes installation instructions and all required hardware. -1 inch ride height.

Fits Sportster 1986 & Late 1989/1999. Will not fit 1200S, 1200C or 883 Hugger models. Reduces travel by 1/2 inch. Part#:M29228 - Black ... $80.15

Fits Sportster 2000/2003. Will not fit 1200C or 883 Hugger. Reduces travel by 1/2 inch. Part #M29244 - Chrome ... $95.15

Don't see what you need?  Contact us.  Chances are we have it.  We have thousands of parts that are not shown online.

15 Percent Coupon, summer promo, Beer Machine

FLAT RATE SHIPPING APPLIES IN CONTINTENTAL 48 UNITED STATES ONLY. AK, HI and APO/FPO will have additional shipping fees. We ship mainly within the U.S.A. and to APO/FPO (military addresses; weight and size restrictions apply.). We also ship to Australia. We do not accept foreign credit cards. Please see our CONTACT page for more information.

Prefer to call in your order to Steel Thunder? Call 603-237-8200.

FREQUENTLY ASKED QUESTIONS

Please note that all prices are subject to change.

***

Steel Thunder Custom Cycles

531 Bungy Road

Columbia, NH 03576

Copyright 2002-2013 Steel Thunder Custom Cycles©

 

Thank you for shopping at Steel Thunder Custom Cycles online motorcycle parts store!

 

 

 

Protected by Copyscape Duplicate Content Detection Software