also see the rest of our site for other Sportster parts & accessories.)
Parts for Sportster®
Pipes for Sportster
Controls for Sportster®
Tanks for Sportster®
Parts for Sportster®
Shocks for Sportster®
Transmission Products for Sportster® (91-up XL)
MORE SPORTSTER PARTS CAN
BE FOUND IN OUR OTHER SECTIONS. See Navigation Bar, left.
Start Conversion Kit for 91/03 Sportster!
Kick starter conversion kit includes chrome sprocket cover,
transmission mainshaft, chrome kick starter arm, rubber pedal,
Requires the replacment of the transmission mainshaft which
is included in the kit. Conversion kit works with stock or aftermarket
exhaust systems. Requires transmission mainshaft to be changed,
forward controls, and relocation of master cylinder. Will not
work with stock mid controls.
Part #V22-0218 - Kickstart conv. kit, fits: XL 1991-2003 5-Speed.
SPECIAL ORDER, NO RETURNS* ... $310.73
policy: Flat rate $12.95 entire order
for manufacturer defect.
Assembly should be carried out by an experienced mechanic
or home hobby mechanic with patience.
Rigid Frame for 2004/Later - Kraft Tech
diameter thick wall DOM steel tubing with 1-1/2" backbone.
TIG-MIG welded for strength.
Uses OE engine mounts.
Uses OE width tire and belt.
degree rake, 0 downtube stretch, 0 backbone stretch, 130/140
in the USA.
CUP CONVERSION KIT FOR SPORTSTER
Use this conversion kit when installing a Big Twin or late
Sportster 1" neck fork assembly on your early Sportster.
Allows easy installation of our Hardbody®
springers as well.
Simply remove your existing cups and install these steel
cups into your frame neck and you are ready for Big Twin
Includes Timken® bearings and races.
#: 36652 -Old-STF
Raw Steel Neck Cup Conversion Kit
Fits K Model & Sportster 1952/1981
ON SPORTSTER GAS TANK PAGE:
Tanks for Late Model XL!
tire Sportster wide frame
SUSPENSION DROP KITS FOR BIG TWIN TOURING, SOFTAIL, DYNA &
SPORTSTER - Burly Brand
Go from stock to slammed
in about an hour!
The Slammer is a complete lowering kit in one box.
No disassembly of forks required, they can stay on the bike while
No special tools needed for installation.
The shocks included in the kit lower the rear up to 2 1/2"
and the fork springs lower the front up to 2".
Kit includes ... (CLICK FOR MORE
INFO AND/OR TO PURCHASE)
Pegs for Sportster
WITH HIGHWAY BARS
hand control kits for late model (2004-2010) Sportster models.
Kits include brake master cylinder with lever, clutch perch with
lever, switch housings and all necessary hardware.
Handlebar Controls Page
is Austin of Maryland's Springer Sportster. Nice! Click image
to see larger.
is Brian's Sportster Basket Case Project.
photo or here
to see pictorial of this custom Sportster wide tire conversion project.
Please Note: This is a hand-built custom, so please don't write
asking about bolt-on parts, because they don't exist.
photo or here to see modified
here to see the TRIKE
that was made from this Sportster.
Click on Photos to see larger.
our black springer front end
Ricko sent us some photos
and this message:
I'm Ricko from Jakarta, Indonesia. I did get some parts for my 03
Sporty from Steel Thunder Custom Cycles through an international
is the list that I had on my 03 Sporty:
1.Screaming Eagle 1200 cylinder
2.Screaming Eagle High Comp Piston
3.Screaming Eagle Ignition Module
4.Screaming Eagle Coil
5.Screaming Eagle Spark Plug Wire
6.Screaming Eagle Bolt In Cam
7.Porting and polish head by Monochrome Indonesia
9.Joker Machine Velocity Stack
11.Wide Glide Conversion Kit with 3* rake (Steel Thunder Custom
12.Kraft/Tech Forward Control (Steel Thunder Custom Cycles)
13.Custom seat by Monochrome Indonesia
14.Stock sportster tank modified by Monochrome Indonesia
15.Braided line ( brake & throttle)
16.Mid USA Chrome Billet 5 ¾ Headlight
17.Joker machine Grip
19.Arlen Ness Mirror
20.Drag Specialties 6” Riser
21.1 ” Drag bars
22.Chrome control and housing switch
23.Hog Pro Daytona 21x3.25 front
24.Hog Pro Daytona 18 x 5.5 rear
25.MT Tire 21x120 front
26.MT tire 18x200 rear
27.Big Boar Products 200 mm wide tire kit.
28.HD front and read tear drops floating break rotors
24.Chrome 4 piston front and rear caliper
25.Side mount plate and led tail light by Monochrome Indonesia
26.Front fender by Monochrome Indonesia
27.Front Spoiler by Monochrome Indonesia
image or here to see larger
One FANTASTIC Sportster!
Seen at Cincy V-Twin Expo.
out our drag bike.
And a WINNNER - 1st Place at Ozark Raceway Park!