Specialty pages:

Sportster Section

Buell parts

V-Rod parts

SPOON-STYLE SEATS FOR SPORTSTER - Drag Specialties

Feature solar-reflective (cool) leather in the seating area and automotive-grade vinyl on sides.
3/16 " ABS thermoformed seat base for a perfect fit.
Fully carpeted bottom with rubber bumpers to protect paint.
Fit with all Drag and most H-D sissy bars.
Include all mounting hardware.
Made in the U.S.A.

NOTE: Seats for 04-08 large-tank models fit perfectly; seats for 04-08 fit small-tank models fit with 1/2 in. space between front of seat and tank. For All 04-08 XL models (29" L x 11" W front):
060804-0330 - Flame ... $289.95 including free shipping*

BIGSEAT - Danny Gray

Deep bucket touring solo provides excellent support for the lower back.
Incorporates proprietary buttcrack design for comfort and secure positioning.
All seats are skirted and available with or without studs.
Integrated form fitting pillion pads are available in small and large versions.

FOR 04-07 XL 883/1200R
Part#:DS0804-0237 Bigseat w/o studs ... $287.96 including free shipping*

FOR 04-07 XL, CUSTOM
Part#:DS0804-0227 Bigseat w/o studs ... $287.96 including free shipping*

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items except for manufacturer defect.

NEW! LOW-PROFILE TOURING SEATS FOR SPORTSTERS - Drag Specialties

Feature solar reflective leather top panels so seat stays cool even in direct sunlight.
Molded polyurethane foam interior; pillow style seats have an additional 1” of memory foam in the seating area.
Thermoformed ABS-plastic seat base for perfect fit.
Fully carpeted bottom with rubber bumper to protect paint.
Low-profile design.
Available in smooth, various stitch styles, and pillow style with memory foam.
Instructions and all necessary hardware included.
Fit with all sissy bars.
Made in the U.S.A.

Please read fitment carefully; seats only fit as described.

FOR 04/08 CUSTOM, 07/08 1200L, 08 1200R MODELS WITH 4.5 GALLON TANK (27" L x 12-1/2" W Front x 10" Wide Rear):

#060804-0258 - Stitch, mild ... $304.95 including free shipping*

#060804-0259 - Stitch, classic ... $314.95 including free shipping*

#060804-0260 - Flame style ... $314.95 including free shipping*

#060804-0261 - Pillow style with memory foam ... $304.95 including free shipping*

FOR 04/08 XL MODELS WITH 3.3 GALLON TANK (28" L x 12-1/2" W x 10" Wide Rear) Not for 1200L:

#060804-0262 - Stitch, mild ... $304.95 including free shipping*

#060804-0263 - Stitch, classic ... $324.95 including free shipping*

#060804-0264 - Flame style ... $314.95 including free shipping*

#060804-0265 - Pillow style with memory foam ... $304.95 including free shipping*

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items except for manufacturer defect.

FOR 04-08 XL CUSTOM, 07-08 1200L, 08 1200R MODELS W/ 4.5 GAL TANK (27” L X 12” W FRONT)
060804-0250 - Smooth ...$199.95 including free shipping*

FOR 04-08 XL MODELS W/ 3.3 GAL TANK (28” L X 12” W FRONT)
060804-0254 - Smooth ...$204.95 including free shipping*

FOR 57-78 XL (11 3/4” L X 10 1/4” W X 24 3/4” OVERALL)
06DS-919105 - Smooth ...$239.95 including free shipping*

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items except for manufacturer defect.

NOTE:  We only have these in the colors as listed.

SORRENTO SEATS FOR SPORTSTER - LePera

Naugahyde. The Sorrento combines the sleek look of the Silhouette seat with the long distance comfort of the Maverick seat.
Comfort is achieved by using a high density Marathon molded foam foundation built on a powder coated steel baseplate.
The baseplate is carpeted to help protect the paint on the frame and fender.
The rider portion of the seat measures 10 3/4" wide and the passenger portion measures 9 3/4" wide. Made in U.S.A.

Part#:DS905907 - Fits all models 1982/2003 ... $415.86 including shipping*NOTE: THIS ITEM IS SPECIAL ORDER. NO EXPRESS SHIPPING IS AVAILABLE, IT WILL TAKE A FEW EXTRA DAYS TO SHIP, NO RETURNS ON SPECIAL ORDER ITEMS.

Part:#:DS0804-0162 - Fits 883 Standard & 1200R Roadster 2004/2006 ... $415.86 including shipping*NOTE: THIS ITEM IS SPECIAL ORDER. NO EXPRESS SHIPPING IS AVAILABLE, IT WILL TAKE A FEW EXTRA DAYS TO SHIP, NO RETURNS ON SPECIAL ORDER ITEMS.

Part#: DS0804-0163 - Fits 883C Custom & 1200C Custom 2004/2006 ... $415.86 including shipping* NOTE: THIS ITEM IS SPECIAL ORDER. NO EXPRESS SHIPPING IS AVAILABLE, IT WILL TAKE A FEW EXTRA DAYS TO SHIP, NO RETURNS ON SPECIAL ORDER ITEMS.

'SILHOUETTE' SOLO SEATS FOR SPORTSTER MODELS - LePera


The 'Silhouette' seats are designed to enhance the lines of your motorcycle with a clean, sleek look. Comfort in each seat is retained by a perfectly sculptured one piece molded foam foundation. All Silhouettes feature a premium grade vinyl cover and a powder coated, steel base plate which is carpeted to help protect your paint. Made in USA.

Fits Sportster models 1982/2003 - Smooth Solo. Part#:TR49-9901 ... $178.76 including shipping*

MU27448

MU27375 P-Pad

Seats to fit '04/L Sportsters!

MU27074 & MU27099

BARE BONES SOLO SEAT FOR SPORTSTER from LePera

Powder coated baseplate has a metal reinforced vinyl protectant around the edges and is carpeted to protect the paint. Specially poured high density Marathon molded foam. Top grade Naugahyde is pulled tight around the edges and then meticulously trimmed for the cleanest finish possible. Double top stitched with bonded polyester thread for durability and longevity. Provides a lower riding position and exposes as much of the fender and frame as possible. Naugahyde. Made in USA.

Part#:MU27448 - Solo Seat - Fits all models 1982/2003... $176.30 including shipping*

Part#: MU27375 - Pillion Pad - Fits all models 1982/2003. (Use with MU27448 above) ... $106.50 including shipping*

Part#: CC640400 - Solo Seat - Fits 883 Standard & 1200R Roadster 2004/2006... $166.46 including shipping*

Part#: MU27099 - Solo Seat - Fits 883C Custom & 1200C Custom 2004/2006 ... $176.30 including shipping*

'Shootout' Ultima Saddles for Sportster

Fits 1982 thru 2003 models. Solo seats for Sportsters are made for hours of comfort in mind. Added back support and quality materials and craftsmanship all come together to make an excellent seat at an excellent price. With or without gel pad. (We highly recommend gel.)

#MW76-706 Shootout seat ... $90.07 including shipping*

#MW76-707 Shootout seat with gel pad ... $105.87 including shipping*                                     

'Showdown' Ultima Saddles for Sportster

Fits 1982 thru 2003 models. Solo seats for Sportsters are made for hours of comfort in mind. Added back support and quality materials and craftsmanship all come together to make an excellent seat at an excellent price. With or without gel pad. (We highly recommend gel.)

#MW76-708 Showdown seat ... $90.07 including shipping*                                                  

#MW76-709 Showdown seat with gel pad ... $105.87 including shipping*                                     

'SANORA' SOLO SEAT & PILLION PAD FOR SPORTSTER 1957/1978 by LePera

This smooth naugahyde covered seat features a flexible skirt trimmed with laced chrome conchos and studs. Built on a powder coated steel base plate that is carpeted to protect the fender, the seat measures 12 inches wide x 16 inches long x 3 inches thick. Solid mounts to frame with included brackets and hardware. Made in USA. Part#:MU27419 - Fits Sportster 1957/1978 ... $190.70 including shipping*                                     

This smooth naugahyde covered pillion pad with studs compliments the 'Sanora' solo seat for the complete look. Built on a powder coated steel base plate, it is contoured for a snug fit and carpeted to protect the fender. Measures 6 inches wide x 10 inches long x 2 inches thick. Includes removable mounting hardware for the rear of pillion pad, you must drill the fender for the front mount. Universal fit. Made in USA.
Part#:DS902122 ... $108.95 including shipping*

SOLO AVAILABLE ONLY

One-Piece Standard Solo Vintage Touring Seats - Mustang

Mustang's Super Touring seats for Sportsters are available in two styles. Each style features a wide driver seat that is deeply pocketed and provides ample back support.

Choose from no-frills, Vintage look featuring a braided edge skirt but no studs or conchos or Vintage Studded. Made in the U.S.A.

Part #: DS0804-0290 - Vintage Solo Seat for 04/07 XL with 3.3 gallon gas tank ... $208.06 including shipping*

Part #: DS0804-0291 - Vintage Solo Seat for 04/07 XLC with 4.5 gallon gas tank ... $208.06 including shipping*

Part #: DS0804-0292 - Studded Vintage Solo Seat for 04/07 XL with 3.3 gallon gas tank ... $226.06 including shipping*                                                  

Part #: DS0804-0293  - Studded Vintage Solo Seat for 04/07 XLC with 4.5 gallon gas tank ... $226.06 including shipping*                                     

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items except for manufacturer defect.

Mounting Instructions for Sportster

One-Piece Wide Vintage Touring Seats - Mustang

Mustang's Super Touring seats for Sportsters are available in two styles. Each style features a wide driver seat that is deeply pocketed and provides ample back support. The wide passenger seat also extends forward over the driver's seat to give additional back support.

Choose from no-frills, Wide Vintage look featuring a braided edge skirt but no studs or conchos or Wide Vintage Studded. Made in the U.S.A.

Part#: DS0804-0288 - Wide Vintage seat for 04/07 XL with 3.3 gallon gas tank ... $379.06 including shipping*

Vintage TouringPart#: DS0804-0289 - Wide Vintage seat for 04/07 XLC with 4.5 gallon gas tank ... $406.06 including shipping*

Vintage TouringPart #: DS0804-0286 - Wide Vintage Studded seat for 04/07 XL with 3.3 gallon gas tank ... $379.06 including shipping*                                                             

Vintage TouringPart#: DS0804-0287 - Wide Vintage Studded seat for 04/07 XLC with 4.5 gallon gas tank ... $406.06 including shipping*

Vintage TouringPart#: DS0804-0294 - Wide Vintage Solo for 04/07 XLC with 4.5 gallon gas tank.  Use with fender bib found here... $253.06 including shipping*

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items except for manufacturer defect.

Mounting Instructions for Sportster

DayTripper™- Mustang

Mustang's advanced comfort technology has been incorporated into this totally new style of custom seat. Ride low, look cool and still be comfortable at the end of the day's ride. The detailed stitch work in the highly durable, synthetic glove-leather cover makes the DayTripper™ a real show winner. Never before has such a low and lean seat been available that feels this good for both the rider and the passenger. Made in the U.S.A.

Part#: DS0804-0282 - for 04/07 XL with 3.3 gallon gas tank ... $289.06 including shipping*              

Part#: DS0804-0203 - for 04/07 XLC with 4.5 gallon gas tank ... $289.06 including shipping*               

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items except for manufacturer defect.

Mounting Instructions for Sportster

Fastback - Mustang

Cut low to the ground with enough molded foam to be comfortable. The Fastback offers a super clean, custom style. The tapered rear section flows smoothly to the fender, yet has adequate padding for use as a passenger seat. Made in the U.S.A.

Part#: DS0804-0285 - for 04/07 XL with 3.3 gallon gas tank ... $271.06 including shipping*               

Part#: DS0804-0285 - - for 04/07 XLC with 4.5 gallon gas tank ... $271.06 including shipping*              

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items except for manufacturer defect.

Mounting Instructions for Sportster

FASTBACK SEATS FOR SPORTSTER MODELS by Mustang

Mustang FASTBACK® custom seats are shaped to hold the rider in place under harder acceleration with adequate padding for long trips...plus the tapered rear section can still be used by a passenger. Rear sections are smooth naugahyde. All Mustang Fastbacks are built on a 16-gauge rust proofed, formed steel base plate. A 9 inch wide front bucket and 6 inch wide passenger section is featured on the early model while the later model has 11 inch wide front bucket and a 6 inch wide passenger section.
Mustang Fastback. Vinyl. Made in USA.

Part#:MU27053 Fits Sportster 1979/1981 ... $251.36 including shipping*                                     

ORIGINAL STUDDED SEATS FOR SPORTSTER MODELS by Mustang

Designed to give the nostalgic illusion of a separate rider seat and passenger pillion, this two-up seat is fabricated on a single steel baseplate for easy installation and removal. The rider seat features a full width bucket shape for comfort and is available in a braided edge apron with concho. This seat is designed to cover the frame rails for a made to fit look. Made from the highest quality expanded vinyl available and features sewn-in panels for a great fit look. This vinyl has the durability and resistance to the elements that exceed original equipment standards, and has the appearance of leather. All seams are sewn twice for strength and the bottom edge that holds the cover to the baseplate is hemmed where the rivets hold the cover to the baseplate. For long life, the baseplate is formed from 16 gauge steel, black powder coated on both sides and carped to help protect the fender's paint. The exact shape, angle and density of the seat's foam is formulated and cast to be soft enough for comfort but resilient enough to stand up to those "all day" rides. Made in USA. Vinyl.

Part#:DS902167 - Rider width 11 1/2", passenger width 6 1/2". Fits Sportster 1958/1978 ... $309.96 including shipping*

Part#:DS902168 - Rider width 12 1/2", passenger width 8". Fits Sportster 1979/1981 ... $309.96 including shipping*

FOR 04-06 XL, CUSTOM
Part #: DS0804-0065 - SaddleHyde ... $387.96 including shipping*                                                    

FOR 79-03 XL
Part #: DS8550JS - SaddleHyde ... $342.96 including shipping*                                                    

FOR 58-78 XL
Part #: DS0804-0058 - SaddleHyde ... $342.96 including shipping*

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items except for manufacturer defect.

MONTEREY SOLO SEAT & PILLION PAD FOR SPORTSTER MODELS 1982/2003 by LePera.


The Monterey Solo seat and Pillion Pad mount solid to the frame using a 16-gauge steel base plate that is powder coated for rust prevention and carpeted to help protect the paint on the frame and fender. Features include high density 'Marathon' molded foam padding covered with premium naugahyde, accented with studs and the seat has leather fringe. The rider seat is 12 1/2 inches wide and the pillion pad is 12 1/2 inches wide. Fits all Sportster models 1982/2003 (except XLS). Made in USA.
Part#:MU27435 Fringe Style Pillow Seat Only ... $304.20 including shipping*                                     

Constructed from 9/16” solid steel, then chrome-plated for a brilliant finish.
Easy, bolt-on design – no drilling required.
Side plates feature a raised accent area (certain models only).
Bars are measured from first bend on leg to the top of the bar.
Side plates are sold separately.
Made in the U.S.A.

For 73-78 XL Sportster - DS-909660 - Stitch ... $246.95 including free shipping*

'REGAL PILLOW' SEAT & PILLION FOR SPORTSTER MODELS by Mustang

Most wanted pillow style with front seat and rear pillion upholstered separately on one steel base plate. This construction maximizes driver back support and keeps the passenger from sliding forward. Fits Sportster Models As Indicated except XLS. Made in USA. Rider width 10 inches, passenger width 7 inches. 4 button style rider seat. Fits Sportster 1958/1978.
Part#: DS900320... $284.06 including shipping*

Full Shoot Out

MALTESE CROSS PILLION PAD FOR CUSTOM USE

• Phantom Pad
• Vinyl Construction
• Ideal for quick and easy installation & removal
• Measures 9" Long x 9" Wide x 2" Thick
• Held in place by 5 dual cavity suction cups with quick release tabs
• Manufacturer recommends for show use only

Fits 10" or Wider Rear Fender ... Part#:MU27389 ... $142.87 including shipping*.                        

REMOVABLE PILLION PAD & SADDLEBAGS FOR CUSTOM USE

• Phantom Pad
• Suction Cup Installation
• Vinyl Construction
• Pillion Pad measures 10" Long x 6" Wide x 1 3/4" Thick
• Saddlebags measure 7 1/4" Long x 2 1/2" Wide x 8" Tall

Part#:MU27390 ... $193.18 including shipping*

REMOVABLE PHANTOM PILLION PADS FOR CUSTOM USE - Phantom Pad

Includes 6 dual cavity suction cups with quick release tabs.
Includes rubber protection pad on bottom side of pillion pads (instead of typical carpet type).
Available in leather, Saddlehyde® Vinyl or Saddlehyde® Vinyl with Gel insert.
Gel inserts conform to the rider distributing the weight evenly across the seat.
Manufacturer recommends for show use only.
Ideal for quick and easy installation & removal.
PRICES INCLUDE SHIPPING*

Great for when she wants to come along for the ride, easy to take off for when she doesn't!

We recommend the Gel Insert, it really makes a difference on those long trips!

SEE CHART BELOW:

REAR FENDER BIBS FOR BIG TWIN AND SPORTSTER - Mustang.

Go solo and leave that pillion pad off. For that low sleek look install one of these Fender Bibs instead. They are designed to add style to your bike while protecting the paint or covering existing scratches. Available in plain style or with studs to match your seat. Naugahyde.

Part#:MU27337  - Studded Rear Fender Bib FX, FXR, Softail & Dyna 14" x 6". .. $47.50 including shipping*