Steel Thunder Custom Cycles motorcycle parts

 

Shopping Pages:

Control Section:

Brakes, discs, rotors, dashes & instrument panels, gauge brackets, footpegs, forward controls, grips, throttle control, handlebar controls, handlebars, levers, linkage, levers, mirrors, risers, shift & jockey control.

Drivetrain Section:

Belt drives, belt drive covers, clutch kits, chain drives, drivetrain packages, kick start transmission, offset sprockets, points, derby & ignition coves, primary belts, primary chains, primary covers, pulley & brake combo kit, rear drive belts, Sportster performance parts, six speed conversion, rear sprockets, rotors, transmissions & parts.

Electrical Section:

Battery related, battery tenders, charging systems,coils & mounts, dash/instrument panels, speedos, tachs, terminal kits, electronic ignitions, handlebar switches, headlights, horns, lighted license plate mounts, lighting, starter motors, taillights, turn signals, wiring harnesses.

Engine Section:

Motorcycle engine parts, drivetrain packages, cams & cam side parts, big bore kits, big bore piston kits, Sportster engine parts, motor mounts, drivetrain section, engine mounts.

Exhaust Section:

Exhaust pipes listed by model, exhaust accessories, insulating wrap, mufflers, extensions, high heat spray, heat shields, clamps and mounts.

Frame/Body Section:

Frames listed by style, engine mounts, fenders, struts, floorboards, foot rests, pegs, frame covers, hardtails, highway bars, kickstands, lowering kits, seats listed by model, shocks, sissy bars & pads, swingarms.. Also, Rolling Chassis Kits.

Front End Section:

Complete front fork assemblies, fairings & fairing accessories, fork brackets/triple trees, fork tubes, sliders, fork legs, boots, springer front ends & parts, wide glide kits.

Fuel Section (Gas, Oil, Air):

Air cleaners & covers, breathers, carburetors & rebuild kits, fuel injection control, gas tanks, gas caps, gas tank cleaner/prep systems, oil, oil coolers, oil line kits, oil pressure & tank gauges, oil pumps, oil tanks, , velocity stacks.

Saddlebag & Windshield Section:

Saddlebags listed by manufacturer, windshields

Wheel Section

Tires,  tire size chart, 40, 60 & 80 spoke wheels, solid wheels.

General Merchandise Section:

Catalogs, covers, gift certificates, gift suggestions, goggles & eyewear, hardware, luggage racks, motors, motorcycle covers, security, locks & alarms, tools, trailer accessories, ramps, wheel chocks, trailer hitches to put on motorcycle.

Other Pages:

Fun, Photos & Links Section:

Photos of our customer's motorcycles, including bike kit builds, trike build link, free biker ecards, jokes, banner links, text links, link to us, webmaster's awards.

Tech & Info Section

Tech tips, tire size chart, engine break-in, suspension & shocks info, rake and trail calculator, contact page, frequently asked questions (FAQ), our credentails, terms & conditions of sale, disclaimer, international shipping policy.

Secured by SSL - an authentic COMOCO site.

 

link

 

 

 

NEW FLAT RATE SHIPPING!  No hidden fees and NO TAX! Only $12.95 in the continental. U.S., no matter how large (or heavy) your order is!  Save $$$ ... order everything you need NOW! 

Sitemap and Search Home Page Contact Us Sportster Section Catalogs

 Sportster® Style Frames

Frame Index -- Sportster Section

FLAT RATE SHIPPING - ONLY $12.95 PER ORDER!

Note: As with any frame-up custom build project, it is common shop practice to pre-assemble the entire motorcycle prior to any paint work for compatibility verification of all parts used.

NEW!

2004/Later!

2004 and later model Sportster rigid frame.

Sportster Rigid Frame for 2004 and up Sportster XL

 

Sportster Style Rigid Frame for 2004/Later - Kraft Tech

1-1/4" diameter thick wall DOM steel tubing with 1-1/2" backbone.
TIG-MIG welded for strength.
Uses OE engine mounts.
Uses OE width tire and belt.

30 degree rake, 0 downtube stretch, 0 backbone stretch,150 tire.

Made in the USA.

Part #: M20010 - Rigid frame for 2004/L Sportster engine ... $1199.06

Kraft Tech stock width rigid frame for Sportster XL

130 tire Sportster stock frame

or

180/200 tire Sportster wide frame

Steel Winged Oil Tank for Kraft Tech Custom Sportster Frames.

Custom steel rear fender for Kraft Tech wide tire Sportster frame.

Kraft Tech  Fender Brace for wide tire Sporster frame.

SPORTSTER STYLE RIGID FRAMES FOR EVO - Kraft Tech

Feature 1 1/4" thick wall, DOM steel tubing with 1 1/2" backbones.
All frames are TIG-MIG welded and will accept Sportster engines (1986-2003).
Frames have 30° neck rake, OE stretch and backbone. KRAFT TECH FRAMES ARE MADE IN THE U.S.A.

(Forgive us for bragging, but we are proud that our resident "Sportster Dude" and mechanic/tech Larry helped with the developmental stages of this new Kraft Tech Sportster frame!)

Part #: M20224 - Sportster 1986/2003 - Stock Frame accepts 130 tire with conventional 1 1/8" belt drive assembly or chain ... $857.50 (Available as Bobber Rolling Chassis HERE)

Part #: M20225 - Sportster 1986/2003 - Wide tire frame accepts a 180-series tire with a stock belt or a 200-series tire with a chain ... $945.26 (Available as Bobber Rolling Chassis HERE)

Needed parts for these two frames (You will receive a catalog with your frame listing these parts and more, or order now and take advantage of our Flat Rate Shipping.  Need help?  Give us a call! 603-237-8200):

Part #M86084 - Custom Oil Tank - Kraft Tech Raw Steel Winged Oil Tank; Fits M20224 & M20225 Frames. 3 Quart Capacity ... $308.11

Part #M22051 - Kraft Tech 14 Gauge Steel 9" wide Rear Fender,
Fits M20225 Frame ... $157.10

Part #M22804 - Kraft Tech Fender Brace, Fits M20225 Frame
(Use with M22051 Fender) ... $68.00

NEW!

IRONHEAD SPORTSTER FRAMES

Wide or Standard widths

Kraft Tech stock width rigid frame for Ironhead Sportster XL

Motor Mounts for Ironhead Sportster Rigid Motorcycle Frame

Steel Winged Oil Tank for Kraft Tech Custom Sportster Frames.

Custom steel rear fender for Kraft Tech wide tire Sportster frame.

 

 

 

 

 

Ironhead Sportster Rigid Frames - Kraft Tech

  • 1-1/4" thick wall DOM Steel tubing with 1-1/2" backbones.
  • Wide tire frames accept 180 series tire with chain drive.
  • Stock frame accepts 140 tire with chain.
  • All frames are TIG-MIG welded & will accept Sportster Engines(1967-85)
  • Component Kits are included with purchase of frame which includes axle, axlenut, and adjusters
  • Frame is designed to use a 1/2" transmission off-set sprocket for proper balance
  • Frames must be used with our part#26036 front lower motor mounts.
  • KRAFT TECH FRAMES ARE MADE IN THE U.S.A.
  • These frames are also available as Rolling Chassis Kits HERE.

#M20226 - 30 degree rake, 0" downtube stretch, 0" backbone stretch, 130/140 tire... $857.50

#M20227 - 30 degree rake, +2" downtube stretch, +2" backbone stretch, 130/140 tire ... $908.04

#M20228 - 30° Rake, 0" Downtube Stretch, 0" Backbone Stretch, 180 Tire ... $945.20

#M20229 - 30° Rake, +2" Downtube Stretch, +2" Backbone Stretch, 180 Tire ... $973.24

Needed parts for these frames (You will receive a catalog with your frame listing these parts and more, or order now and take advantage of our Flat Rate Shipping.  Need help?  Give us a call! 603-237-8200):

Part #M26036 - Motor Mount ... $29.10 (Minimum total purchase $35.00. Take advantage of our Flat Fee Shipping and get everything you need now!)

Part #M86084 - Custom Oil Tank - Kraft Tech Raw Steel Winged Oil Tank; Fits M20224 & M20225 Frames. 3 Quart Capacity ... $308.11

Part #M22051 - Kraft Tech 14 Gauge Steel 9" wide Rear Fender,
Fits M20225 Frame ... $157.10

Paughco custom rigid frame for sportsters XL, 5 speed or 4 speed trannys.

CUSTOM RIGID FRAMES FOR SPORTSTER - Paughco

These frames have standard width rear sections that can accept 130 series tires with a conventional 1 1/8" wide rear belt or chain.
Equipped with 1" OEM cast neck.
Made from 1020 DOM steel.
0° and no stretch without fuel tank mounts.
For use with rear disc brakes.

Part #: M20222 - Sportster 1986/2003, Transmission: 5 Speed ... $860.31

Part #: M20223 - Sportster 1977/1985, Transmission: 4 Speed ... $860.31

Rear Fork for Evo Sportster, OE Style - Hardbody by Kraft Tech

Sportster (XL)

Chrome

Rear Fork for Evo Sportster, OE Style - Hardbody by Kraft Tech

Made on new tooling which has been tested for fit, this high quality chrome plated steel rear fork for Sportster Evolution accepts all OE internal pivot components. Fits Hugger 883 1987/1999 and all Sportster models 1988/1999. Chrome plated.
Part#:M29427 ... $236.94

NEW!

Neck cup conversion kit for Sportster fits K modesl and XL 1952-1981.  Now early sportsters can cange front ends to springers and more!

NECK CUP CONVERSION KIT FOR SPORTSTER

Use this conversion kit when installing a Big Twin or late Sportster 1" neck fork assembly on your early Sportster.
Allows easy installation of our Hardbody® springers as well.
Simply remove your existing cups and install these steel cups into your frame neck and you are ready for Big Twin forks!
Includes Timken® bearings and races.

Part #: M36652 - Old-STF - Raw Steel Neck Cup Conversion Kit,
Fits K Model & Sportster 1952/1981 ... $122.85

Confused about frame terminology? See tech tip #9. See tech tip #10 for a rake and trail calculator. TECH TIP PAGE

Don't see what you need?  Contact us.  Chances are we have it.  We have thousands of parts that are not shown online.

15 Percent Coupon, summer promo, Beer Machine

FLAT RATE SHIPPING APPLIES IN CONTINTENTAL 48 UNITED STATES ONLY. AK, HI and APO/FPO will have additional shipping fees. We ship within the U.S.A. and to APO/FPO (military addresses; weight and size restrictions apply.). We do not accept foreign credit cards. Please see our CONTACT page for more information.

Prefer to call in your order to Steel Thunder? Call 603-237-8200.

FREQUENTLY ASKED QUESTIONS

Please note that all prices are subject to change.

***

Steel Thunder Custom Cycles

531 Bungy Road

Columbia, NH 03576

Copyright 2002-2013 Steel Thunder Custom Cycles©

 

Thank you for shopping at Steel Thunder Custom Cycles online motorcycle parts store!

 

 

 

Protected by Copyscape Duplicate Content Detection Software