Steel Thunder Custom Cycles motorcycle parts

 

Shopping Pages:

Control Section:

Brakes, discs, rotors, dashes & instrument panels, gauge brackets, footpegs, forward controls, grips, throttle control, handlebar controls, handlebars, levers, linkage, levers, mirrors, risers, shift & jockey control.

Drivetrain Section:

Belt drives, belt drive covers, clutch kits, chain drives, drivetrain packages, kick start transmission, offset sprockets, points, derby & ignition coves, primary belts, primary chains, primary covers, pulley & brake combo kit, rear drive belts, Sportster performance parts, six speed conversion, rear sprockets, rotors, transmissions & parts.

Electrical Section:

Battery related, battery tenders, charging systems,coils & mounts, dash/instrument panels, speedos, tachs, terminal kits, electronic ignitions, handlebar switches, headlights, horns, lighted license plate mounts, lighting, starter motors, taillights, turn signals, wiring harnesses.

Engine Section:

Motorcycle engine parts, drivetrain packages, cams & cam side parts, big bore kits, big bore piston kits, Sportster engine parts, motor mounts, drivetrain section, engine mounts.

Exhaust Section:

Exhaust pipes listed by model, exhaust accessories, insulating wrap, mufflers, extensions, high heat spray, heat shields, clamps and mounts.

Frame/Body Section:

Frames listed by style, engine mounts, fenders, struts, floorboards, foot rests, pegs, frame covers, hardtails, highway bars, kickstands, lowering kits, seats listed by model, shocks, sissy bars & pads, swingarms.. Also, Rolling Chassis Kits.

Front End Section:

Complete front fork assemblies, fairings & fairing accessories, fork brackets/triple trees, fork tubes, sliders, fork legs, boots, springer front ends & parts, wide glide kits.

Fuel Section (Gas, Oil, Air):

Air cleaners & covers, breathers, carburetors & rebuild kits, fuel injection control, gas tanks, gas caps, gas tank cleaner/prep systems, oil, oil coolers, oil line kits, oil pressure & tank gauges, oil pumps, oil tanks, , velocity stacks.

Saddlebag & Windshield Section:

Saddlebags listed by manufacturer, windshields

Wheel Section

Tires,  tire size chart, 40, 60 & 80 spoke wheels, solid wheels.

General Merchandise Section:

Catalogs, covers, gift certificates, gift suggestions, goggles & eyewear, hardware, luggage racks, motors, motorcycle covers, security, locks & alarms, tools, trailer accessories, ramps, wheel chocks, trailer hitches to put on motorcycle.

Other Pages:

Fun, Photos & Links Section:

Photos of our customer's motorcycles, including bike kit builds, trike build link, free biker ecards, jokes, banner links, text links, link to us, webmaster's awards.

Tech & Info Section

Tech tips, tire size chart, engine break-in, suspension & shocks info, rake and trail calculator, contact page, frequently asked questions (FAQ), our credentails, terms & conditions of sale, disclaimer, international shipping policy.

Secured by SSL - an authentic COMOCO site.

 

link

 

 

 

NEW FLAT RATE SHIPPING!  No hidden fees and NO TAX! Only $12.95 in the continental. U.S., no matter how large (or heavy) your order is!  Save $$$ ... order everything you need NOW! 

Announcing NEW HOURS:  Starting Monday July 28th, we will be open Wednesday thru Sunday 10 - 6.
Sitemap and Search Home Page Contact Us Sportster Section Catalogs

Motorcycle Shift and Jockey Controls

Click Here For Shift Linkage 

NEW!

EASY SHIFT KITS FOR BIG TWIN & SPORTSTER - Pingel

Easy Shift kit lets you shift at the push of a button.  Motorcycle Shift Kit from Pingel fits Sportster (XL) and Big Twin Harley-Davidson.

The Pingel Electric Easy Shift kit electronically suspends the ignition system allowing the transmission to smoothly shift up or down at the push of a button.
No need to use the foot shifter and the clutch is used only when starting or stopping.
Works for normal street riding or full throttle shifting.
A perfect match for male and female riders who own bikes that require a lot of hand strength to pull in the clutch lever.
OEM shifting ability is retained even after installation.
Kits include a dual button handlebar control, a shift cylinder plated with chrome finish, bolt-on shift cylinder support bracket and a state of the art control module which relays a quick signal from the dual button handlebar control to the shift cylinder without dela.y
Also includes an electronic engine kill module and step-by-step instructions with photos for easy installation.


Part #: M44420 - Pingel, Universal Fitment. For use with 1 to 4 coil engines and 1" handlebars ... $727.65

Brass Skull Motorcycle Shifter Knob.

Like BRASS? Check out THIS PAGE

Copper Skull Motorcycle Shifter Knob.

Chrome Skull motorcycle shifter knob.

Like SKULLS? Check out THIS PAGE.

SKULL SHIFT KNOBS - V-FACTOR

Cast aluminum with available finishes listed below.
Tapped to 3/8-16 threads.

Part #: M44159 - Brass Plated Skull Shift Knob ... $39.90

Part #: M44160 - Copper Plated Skull Shift Knob ... $37.99

Part #: M44161 - Chrome Plated Skull Shift Knob... $39.99

Dice Shift Knob from Detroit Bros.
DICE SHIFT KNOBS - Detroit Bros

Made from an acrylic die, with a 3/8"-16 helicoil insert.
Blue Color.

Part #: 44155 ... Suggested Retail $98.95

Paughco Foot Clutch Pedal and mount bracket for Big Twin.

44209 jockey shift lever 44503 clutch lever rod

44241 clutch lever rod end

FOOT CLUTCH PEDAL AND MOUNT BRACKET FOR BIG TWIN - Paughco

This chrome plated foot clutch pedal and mounting bracket installs with ease. Also required for new installation order our MU44209 Jockey shift lever, our MU44503 clutch rod and our MU44241 rod end (sold as set below). Made in U.S.A.

Part#: M44508 ... $108.65

Required parts as a Kit: 1) #M44209 - Chrome plated Jockey shift lever screws to shift ratchet dust cover in place of shifter shaft lever. Fits all FL Models 1952/Early 1979 with Foot shift 4 speed transmission. 2) #M44503 - Clutch Lever Rod 22" Long fits Big Twin 1952/1967 and for use with Big Twin "Mousetrap" & Jockey Shift Kits
Replaces HD# 36918-52. 3) #M44241 - Clutch Lever Rod End 7/16" I.D.  ( Bolt Hole fits Big Twin 1936/1978 clutch "Mousetrap" and our 44508 Foot Clutch Pedal, above.) Price for kit ... $108.32

BUY BOTH TOGETHER & SAVE : M44508-209-503-508... $206.97

SEE SHIFTER LINKAGE/CONTROL RODS HERE

We hope to have more jockey control items soon.

Don't see what you need?  Contact us.  Chances are we have it.  We have thousands of parts that are not shown online.

15 Percent Coupon, summer promo, Beer Machine

FLAT RATE SHIPPING APPLIES IN CONTINTENTAL 48 UNITED STATES ONLY. AK, HI and APO/FPO will have additional shipping fees. We ship within the U.S.A. and to APO/FPO (military addresses; weight and size restrictions apply.). We do not accept foreign credit cards. Please see our CONTACT page for more information.

Prefer to call in your order to Steel Thunder? Call 603-237-8200.

FREQUENTLY ASKED QUESTIONS

Please note that all prices are subject to change.

***

Steel Thunder Custom Cycles

531 Bungy Road

Columbia, NH 03576

Copyright 2002-2013 Steel Thunder Custom Cycles©

 

Thank you for shopping at Steel Thunder Custom Cycles online motorcycle parts store!

 

 

 

Protected by Copyscape Duplicate Content Detection Software