Steel Thunder Custom Cycles motorcycle parts

 

Shopping Pages:

Control Section:

Brakes, discs, rotors, dashes & instrument panels, gauge brackets, footpegs, forward controls, grips, throttle control, handlebar controls, handlebars, levers, linkage, levers, mirrors, risers, shift & jockey control.

Drivetrain Section:

Belt drives, belt drive covers, clutch kits, chain drives, drivetrain packages, kick start transmission, offset sprockets, points, derby & ignition coves, primary belts, primary chains, primary covers, pulley & brake combo kit, rear drive belts, Sportster performance parts, six speed conversion, rear sprockets, rotors, transmissions & parts.

Electrical Section:

Battery related, battery tenders, charging systems,coils & mounts, dash/instrument panels, speedos, tachs, terminal kits, electronic ignitions, handlebar switches, headlights, horns, lighted license plate mounts, lighting, starter motors, taillights, turn signals, wiring harnesses.

Engine Section:

Motorcycle engine parts, drivetrain packages, cams & cam side parts, big bore kits, big bore piston kits, Sportster engine parts, motor mounts, drivetrain section, engine mounts.

Exhaust Section:

Exhaust pipes listed by model, exhaust accessories, insulating wrap, mufflers, extensions, high heat spray, heat shields, clamps and mounts.

Frame/Body Section:

Frames listed by style, engine mounts, fenders, struts, floorboards, foot rests, pegs, frame covers, hardtails, highway bars, kickstands, lowering kits, seats listed by model, shocks, sissy bars & pads, swingarms.. Also, Rolling Chassis Kits.

Front End Section:

Complete front fork assemblies, fairings & fairing accessories, fork brackets/triple trees, fork tubes, sliders, fork legs, boots, springer front ends & parts, wide glide kits.

Fuel Section (Gas, Oil, Air):

Air cleaners & covers, breathers, carburetors & rebuild kits, fuel injection control, gas tanks, gas caps, gas tank cleaner/prep systems, oil, oil coolers, oil line kits, oil pressure & tank gauges, oil pumps, oil tanks, , velocity stacks.

Saddlebag & Windshield Section:

Saddlebags listed by manufacturer, windshields

Wheel Section

Tires,  tire size chart, 40, 60 & 80 spoke wheels, solid wheels.

General Merchandise Section:

Catalogs, covers, gift certificates, gift suggestions, goggles & eyewear, hardware, luggage racks, motors, motorcycle covers, security, locks & alarms, tools, trailer accessories, ramps, wheel chocks, trailer hitches to put on motorcycle.

Other Pages:

Fun, Photos & Links Section:

Photos of our customer's motorcycles, including bike kit builds, trike build link, free biker ecards, jokes, banner links, text links, link to us, webmaster's awards.

Tech & Info Section

Tech tips, tire size chart, engine break-in, suspension & shocks info, rake and trail calculator, contact page, frequently asked questions (FAQ), our credentails, terms & conditions of sale, disclaimer, international shipping policy.

Secured by SSL - an authentic COMOCO site.

 

link

 

 

 

Rigid Frame Seats

Seats for Sportster

FXR & Dyna & Deuce Seats

Softail Seats

Big Twin 4 Speed Seats

Custom & Retro Seats

Accessories - Pillion pads, Bibs, etc

Sissy Bars & Pads

NEW FLAT RATE SHIPPING!  No hidden fees and NO TAX! Only $12.95 in the continental. U.S., no matter how large (or heavy) your order is!  Save $$$ ... order everything you need NOW! 

Announcing NEW HOURS:  Starting Monday July 28th, we will be open Wednesday thru Sunday 10 - 6.
Sitemap and Search Home Page Contact Us Sportster Section Catalogs

 Motorcycle Seats for FLT, Road King (FLHR), Road Glide (FLTR) & FLHT

Dresser/Touring Seats

Flat Rate Shipping: $12.95 per order

08/Later:

Villain seat for touring motorcycles from Le Pera.

"VILLAIN" SEAT FOR TOURING MOTORCYCLES - LePera

  • High quality naugahyde over a molded base.
  • One piece steel powder coated base plate that is carpeted.
  • Truely a unique design sure to set you apart from the rest of the crowd.
  • Cutting edge style with quality craftmenship Le Pera is known for.
  • Made in the U.S.A.

Part#:M27000 - Fits HD Touring Models 2008/Later ...$479.95

Sillouette Seats fro FLT model Harley-Davidson motorcycles. Dresser Style.

DRESSER SEAT

"SILHOUETTE" MOTORCYCLE SEATS FOR FLT MODELS - LePera

If you like to sit low in the saddle, then this is for you. The Silhouette's low sleek trend setting style has taken the motorcycle world by storm and made it a favorite among motorcycle enthusiasts world wide. With all of its flowing edges smooth and rounded, it's perfectly contoured shape melts into the likes of your FLT. Comfort in each Silhouette is achieved by using a perfectly sculpted one piece molded foam foundation. With the Silhouette's ground breaking style and attention to detail, you simply will not find a cleaner more beautiful seat anywhere.
Made in the U.S.A.

Part#:M27024 - Dresser 1997/2001. ... $293.12

15 inch solo seat for Road King, FLHT, FLTR, FLHX Street Glide

 

13-1/2 inch rear seat for touring models from Mustang.  Made in America!

SOLO AND REAR SEAT - Mustang

The solo seat features a nose narrower than stock so the rider can plant his feet on the ground. The seat is deeply contoured to give good lower back support.
The rear seat features internal steel support wings for long distance passenger comfort and extends forward for additional rider back support.  Made in the U.S.A.

Part #: M27276 - 15" Solo Seat
Fits Road King 2008, FLHT & FLTR 2008, FLHX Street Glide 2008 ... $309.40

Part #: M27277 - 13 1/2" Rear Seat
Fits Road King 2008, FLHT & FLTR 2008, FLHX Street Glide 2008 ... $193.54

Mustang Dresser Motorcycle Seat with driver backrest.

SOLO ROAD KING SEAT WITH DRIVER BACKREST AND OPTIONAL REAR SEAT - Mustang

Solo seat features built-in backrest and has a nose narrower than stock so that the rider can plant his feet on the ground.
The back rest receptacle is welded to a rust-proofed 16 gauge steel baseplate.
Wide recessed rear seat offers maximum comfort and requires a fender nut kit (not included). Made in the U.S.A.

Part #: M27282 - Vinyl 15" Solo Seat with Backrest
Fits Road King models 1997/2007 ... $530.37

Part #: M27279 - Vinyl 13 1/2" Rear Seat
Fits Road King models 1997/2007 ... $193.54

Optional Fender/Seat Nut Kit - V-Factor: If fender has a plastic plug rather than a nut insert, remove plug and use nut kit to mount solo or rear seat.
Part #: M27945 - 1/4-20 thread Seat Nut Kit ... $2.65 (Please Note: Our minimum order is $35.00 total. Order with seat, or take advantage of our low Flat Rate Shipping and order everything you need now!)

Studded Wide Mustang Solo Seat with Driver Backrest for Road King, FL Screaming Eagle, FLHX Street Glide motorcycles.

M27284

Smooth Wide solo motorcycle seat with driver backrest for touring bikes.

M27278

WIDE SOLO SEATS WITH DRIVER BACKREST FOR ROAD KING - Mustang

15" Solo with Backrest features a nose narrower than stock so that the rider can plant his feet on the ground.
The backrest receptacle is welded to a rust proofed, 16 gauge steel baseplate.  Made in the U.S.A.

Part #: M27284 Wide Studded Solo with Driver Backrest
Fits Road King 1997/2007, FL Screamin' Eagle 1997/2005, FLHX Street Glide 2006/2007 ... $553.09

Part #: M27278 Wide Smooth Solo with Driver Backrest
Fits Road King 2008, FLHT & FLTR 2008 and FLHX Street Glide 2008 ... $515.00

Mustang one piece touring seat, fits road king, Screamin' Eagle, FLHX Street Glide

One Piece Touring Seat - Mustang

Seat measures 17" wide front bucket and 14" wide passenger seat.  Slotted to accept driver backrest kit (sold lower on this page).  Made in the U.S.A.

Part #: M27280 - Fits Road King 1997/2007, Screamin' Eagle 1997/2005, FLHX Street Glide 2006/2007 ... $440.85

Mustang Ultra Touring Seat for Road King, Regal padded style.

Regal

Smooth Mustang Ultra Touring Seat for Road King FLHT, FLTR motorcycles.

Smooth

Ultra Touring Seats for Road King - Mustang

Ultra comfort vinyl seats measure 17" wide front bucket and 16" wide passenger seat.  Available in Regal or Smooth Style. Made in the U.S.A.

Fits FLHT & FLTR 1997/2007.

Part #: M27285 - Regal Ultra Touring Seat ... $450.25

Part #: M27286 - Smooth Ultra Touring Seat ...$440.85

Smooth Touring motorcycle Seat for Road King. Mustang.

 

TOURING SEATS FOR ROAD KING - Mustang

Designed for long distance comfort, these Touring Seats are a "must" whenever any amount of serious "saddle time" is required. Face it, if your original equipment seat makes you sore after about 45 minutes, the rest of your trip will be miserable. To help solve the problem of getting both of your feet planted firmly on the ground at a stop light, Mustang has made the nose of the seat 1 1/2" narrower than stock. These seats are constructed on a 3/16" thick fiberglass baseplate and will accept an OE rider backrest. The rider portion of the seat measures 17" wide and the passenger portion of the seat measures 14" wide. Fits Road King (FLHR) models 1997/Later. Includes black pearl centered studs. Made in the U.S.A.

Smooth - Part#:M27237 - Fits Road King (FLHR) models 1997/Later. ... $469.07

Utra Drive Backrest Kit for one peice touring motorcycle seat.

ULTRA DRIVER BACKREST KIT - Mustang

Totally adjustable and removable.
Chrome plated hardware.
Works with stock one-piece touring seat, not a solo.

Made in the U.S.A.

Part #: M27287 Ultra Driver Backrest Kit ... $239.00

Mustang Wrap Around Backrest for Touring motorcycles.

WRAP AROUND BACKREST - Mustang

Harley-Davidson® Extended Arm Wrap-Around Backrest, Smooth, No Studs.

Part #: M27288 - Fits FLT, FLHT 1986/2007 ... $252.67

Motorcycle passanger backrest pad from Mustang, for touring bikes.

PASSENGER BACKREST PAD - Mustang

Perfect match for any Road King seat.
Contoured pad mounts with three chrome screws and a triangle mounting plate.
Pad measures 12" wide x 9" tall.

Fits Road King 1994/2008, FLHT & FLTR 2008, Screamin' Eagle 1997/2005, FLHX Street Glide 2006/2008

Part #: M27536 - Passenger Backrest Pad for touring motorcycles ... $128.95

Don't see what you need?  Contact us.  Chances are we have it.  We have thousands of parts that are not shown online.

15 Percent Coupon, summer promo, Beer Machine

FLAT RATE SHIPPING APPLIES IN CONTINTENTAL 48 UNITED STATES ONLY. AK, HI and APO/FPO will have additional shipping fees. We ship within the U.S.A. and to APO/FPO (military addresses; weight and size restrictions apply.). We do not accept foreign credit cards. Please see our CONTACT page for more information.

Prefer to call in your order to Steel Thunder? Call 603-237-8200.

FREQUENTLY ASKED QUESTIONS

Please note that all prices are subject to change.

***

Steel Thunder Custom Cycles

531 Bungy Road

Columbia, NH 03576

Copyright 2002-2013 Steel Thunder Custom Cycles©

 

Thank you for shopping at Steel Thunder Custom Cycles online motorcycle parts store!

 

 

 

Protected by Copyscape Duplicate Content Detection Software