Steel Thunder Custom Cycles motorcycle parts

 

Shopping Pages:

Control Section:

Brakes, discs, rotors, dashes & instrument panels, gauge brackets, footpegs, forward controls, grips, throttle control, handlebar controls, handlebars, levers, linkage, levers, mirrors, risers, shift & jockey control.

Drivetrain Section:

Belt drives, belt drive covers, clutch kits, chain drives, drivetrain packages, kick start transmission, offset sprockets, points, derby & ignition coves, primary belts, primary chains, primary covers, pulley & brake combo kit, rear drive belts, Sportster performance parts, six speed conversion, rear sprockets, rotors, transmissions & parts.

Electrical Section:

Battery related, battery tenders, charging systems,coils & mounts, dash/instrument panels, speedos, tachs, terminal kits, electronic ignitions, handlebar switches, headlights, horns, lighted license plate mounts, lighting, starter motors, taillights, turn signals, wiring harnesses.

Engine Section:

Motorcycle engine parts, drivetrain packages, cams & cam side parts, big bore kits, big bore piston kits, Sportster engine parts, motor mounts, drivetrain section, engine mounts.

Exhaust Section:

Exhaust pipes listed by model, exhaust accessories, insulating wrap, mufflers, extensions, high heat spray, heat shields, clamps and mounts.

Frame/Body Section:

Frames listed by style, engine mounts, fenders, struts, floorboards, foot rests, pegs, frame covers, hardtails, highway bars, kickstands, lowering kits, seats listed by model, shocks, sissy bars & pads, swingarms.. Also, Rolling Chassis Kits.

Front End Section:

Complete front fork assemblies, fairings & fairing accessories, fork brackets/triple trees, fork tubes, sliders, fork legs, boots, springer front ends & parts, wide glide kits.

Fuel Section (Gas, Oil, Air):

Air cleaners & covers, breathers, carburetors & rebuild kits, fuel injection control, gas tanks, gas caps, gas tank cleaner/prep systems, oil, oil coolers, oil line kits, oil pressure & tank gauges, oil pumps, oil tanks, , velocity stacks.

Saddlebag & Windshield Section:

Saddlebags listed by manufacturer, windshields

Wheel Section

Tires,  tire size chart, 40, 60 & 80 spoke wheels, solid wheels.

General Merchandise Section:

Catalogs, covers, gift certificates, gift suggestions, goggles & eyewear, hardware, luggage racks, motors, motorcycle covers, security, locks & alarms, tools, trailer accessories, ramps, wheel chocks, trailer hitches to put on motorcycle.

Other Pages:

Fun, Photos & Links Section:

Photos of our customer's motorcycles, including bike kit builds, trike build link, free biker ecards, jokes, banner links, text links, link to us, webmaster's awards.

Tech & Info Section

Tech tips, tire size chart, engine break-in, suspension & shocks info, rake and trail calculator, contact page, frequently asked questions (FAQ), our credentails, terms & conditions of sale, disclaimer, international shipping policy.

Secured by SSL - an authentic COMOCO site.

 

link

 

 

 

NEW FLAT RATE SHIPPING!  No hidden fees and NO TAX! Only $12.95 in the continental. U.S., no matter how large (or heavy) your order is!  Save $$$ ... order everything you need NOW! 

Sitemap and Search Home Page Contact Us Sportster Section Catalogs

Motorcycle Handlebar Risers

Also see handlebars for handlebar/riser combos.
For American V-twin custom and Harley Davidson Motorcycles

For Springers.

Now in Black or Chrome

Springer risers in heights from 3 to 12 inch rise.

Black Risers for Springer Handlebars/Font ends.

SPRINGER HANDLEBAR RISERS FOR CUSTOM USE - V-FACTOR

Just like the risers shown above, but for Springer Front Ends. More heights! Fits 1" handlebars. Aluminum construction for light weight. Chrome Plated.
Springer risers include 1/2-20 socket head screws and washers.

Chrome
Height
Part #
Price
Buy Now
3"
M41009
$63.45
4"
M41008
$69.95
5"
M41016
$72.45
6"
M41007
$75.60
8"
M41006
$88.20
10"
M41017
$106.85
12"
M41018
$114.15
Black
3"
M41019
58.65
4"
M41020
61.45
5"
M41021
67.90
6"
M41014
69.98

These Risers Fit Springer Front Forks.

Smooth top risers for wide springers.

Risers shown on springer front fork.

RISER FOR WIDE SPRINGER FORKS - V-Factor

Chrome Plated.
Fit 1" Handlebars.
2" O.D. smooth cap screws into top clamp hiding clamp pinch bolts.
Billet 6061-T6 aluminum 1 1/2" round body.
Through-bolt design for easy installation.
Includes 1/2"-20 allen head bolts.

Part#:M41033 - 4" Tall Risers ... $110.38

Part#:M41034 - 6" Tall Risers ... $114.98

BMX risers from Detroit Bros shown on motorcycle.

Detroit Bros BMX Riser set comes polished or unfinished so you can customize it any color you want.

BMX RISERS - Detroit Bros

These risers are styled after the BMX risers of our youth, but remade for heavy duty action.
The face measures 2" square and they are 3.5" deep.
The stainless steel posts are included and are 3" tall and tapped 1/2-13.
Fits 1" bars only. Polished style shown, but raw aluminum also available.

Part#:M41056 - Raw Finish Pair ... $254.67

Part#:M41057 - Polished Finish Pair ... $277.83

2" DUAL HANDLEBAR CLAMP ASSEMBLIES - Joker Machine

Replace your heavy "cast" handlebar risers with one of these high performance All-Billet Aluminum Riser sets!
Fully CNC machined Racing styled design is made from solid 6061-T6 bar stock for maximum strength!
Special alloy "Gold Zinc" mounting bolts are included.
Lightweight "DUAL" design top clamp gives your bike a unique "CAFE" racer look! - A MUST WHEN USING OUR SPEEDOMETER RE-LOCATING BRACKET! (sold lower on page)
Available in Black or Clear anodized, and Chrome finish.
Designed for 1" diameter bars.
Top clamp measures 1.1" x 2.4".  Made in the U.S.A.

PLEASE NOTE:  "Joker" items are Special Order Items.  While most items ship the same or next business day, special order items take a few extra days to ship.  No express delivery available.  No returns on Special Order Items except for manufacturer defect.

Part#: D0602-0370 - Clear Anodized Dual Handlebar Clamp Assembly for 1 inch bars ... $144.95

 

Part#: D0602-0368 - Black Anodized Dual Handlebar Clamp Assembly for 1 inch bars ... $144.95

Part #: D0602-0369 - Chrome Plated Dual Handlebar Clamp Assembly for 1 inch bars ... $154.95

Black series 900  handlebar risers for 1 inch bars from Joker Machine.

Clear anodized dual handlebar clamp riser assembly from Joker Machine for one inch bars.

Close up of end of series 900 handlebar clamp with cafe racer look.

MORE JOKER MACHINE PRODUCTS & SPORTSTER/NIGHTSTER PRODUCTS CAN BE FOUND HERE.

"SERIES 900" BRIDGE STYLE HANDLE CLAMPS - Joker Machine

Replace your "cast" handlebar risers with one of these high performance All-Billet Aluminum Riser sets!
Fully CNC machined Racing styled design is made from solid 6061-T6 bar stock for maximum strength!
Special alloy "Gold Zinc" mounting bolts are included.
Lightweight "BRIDGE" design top clamp gives your bike a unique "CAFE" racer look!
Available in Hard Black or Clear anodize and chrome finishes.
Raises your bars 15mm from stock and is designed for 1" diameter bars. Made in the U.S.A.

PLEASE NOTE:  "Joker" items are Special Order Items.  While most items ship the same or next business day, special order items take a few extra days to ship.  No express delivery available.  No returns on Special Order Items except for manufacturer defect.

Part#: D0603-0266 - Black Anodized Bridge Riser Set for 1 inch bars ... $144.95

Part #: D0603-0267 - Chrome Plated Bridge Riser Set for 1 inch bars ... $154.45

  Part #: D0603-0268 - Clear Anodized Bridge Riser Set for 1 inch bars ... $144.95

FXDF style risers with 5 inch rise for 1.25 diameter handelbars.
FXDF STYLE RISERS FOR CUSTOM USE - V-FACTOR

5" rise for each riser in the kit.
Forged 6061-T6 billet aluminum risers and clamp for 1 1/4" diameter handlebars.

Part #:M41058  - Chrome Plated Riser Kit, Fits FXDF 2008/Later & custom applications. Replaces HD# 59783-08 & 56898-08 ... $98.95
Slotted Handlebar Risers for Cusom Use.  Chrome Plated.  For 1 inch handlebars.
SLOTTED HANDLEBAR RISERS FOR CUSTOM USE - V-FACTOR

4" rise and 1" pullback.
Constructed from 6061-T6 billet aluminum and beautifully chrome finished.
Features allen head screws counter bored in top clamps.
Drilled and tapped for 1/2-13 mounting bolts.

Part#: M41040 - Chrome Plated Riser Pair, Fits 1" handlebars ... $101.15
Handlebar risers for custom use,  in 3, 4, 6 & 8" sizes.

HANDLEBAR RISERS FOR CUSTOM USE - V-Factor

Chrome Plated.
Fits 1" handlebars.
Aluminum construction for light weight (except for the 8", which are highly polished, chrome plated steel).
Require 1/2-20 threaded mounting bolts, which can be found in Control Section (not included).
Sold in Pairs.

Height
Part #
Price
Buy Now
3"
M41030
$67.25
4"
M41031
$64.70
6"
M41032
$73.30
8"
M41029
$87.30

V-FACTOR DUECE STYLE HANDLEBAR RISERS

1 1/2" pullback and 5" rise.
Show quality chrome plating.
Includes upper handlebar screws.
Use with 1/2-13 mounting bolts.

Fits FXSTD 2000/Later & custom use.

Part#:M41050 - Chrome Plated Set, Replaces HD# 56033-00 ... $70.00

Smooth Top Handlebar risers for custom use.

Unique top assembly produces the illusion of a boltless clamp.

SMOOTH TOP HANDLEBAR RISERS FOR CUSTOM USE - V-FACTOR

Chrome Plated.
Fits 1" O.D. handlebars.
Unique top assembly produces the illusion of a boltless clamp.
Forged aluminum construction for high strength and light weight.
Rise is measured from bottom of riser to the center of the handlebar.
Drilled and tapped for mounting bolts as listed.
Sold as a set.

Rise Thread Part # Price Buy Now
2" 1/2-20 M41037 $113.40
4" 1/2-20 M41038 $118.30
6" 1/2-20 M41039 $129.35
8" 1/2-13 M41036 $145.99
Chrome riser kit, 9.5 inches tall, 30 degree bend, 6 inch up.
RISER KIT FOR ALL MODELS - V-FACTOR

1 1/4" diameter for custom look.
9 1/2" tall, 30° bend, 6" up riser.
Drilled and tapped for 1/2-13 mounting bolts.

Part #: M41010 - Chrome Plated Riser Kit, Fits 1" handlebars ... $86.00
Custom Pullback riser set for 1 inch handlebars.
CUSTOM PULLBACK RISER SET FOR ALL MODELS - V-FACTOR

Fits 1" handlebars.
5" rise and 2 1/2" pullback for a more comfortable riding position.
Features allen head screws counter bored in top clamps.
Drilled and tapped for 1/2-13 mounting bolts.
See the control section for necessary riser bolts.

Part #: M41023 - Chrome Plated Set, Replaces HD# 94858-83T ... $56.25
FXSTB style 6 inch tall risers with scalloped top clamp.
FXSTB STYLE RISER SET FOR ALL MODELS - V-FACTOR

6" tall risers with scalloped top clamp.
Replicas of FXSTB risers.
Drilled and tapped for 1/2-13 mounting bolts.

Part #: M41012 - Chrome Plated Set, Replaces HD# 56223-98 ... $63.65 including shipping*
FXSTB Style handlebar risers , 6 inch tall.
FXSTB STYLE HANDLEBAR RISERS FOR ALL MODELS -
V-FACTOR


High quality 6" rise handlebar risers.
Styled after the FXSTB model risers.

Part #: M41011- Chrome Plated Riser Set, Fits all models,
Replaces HD# 56223-98 ... $42.50

For 1-1/4" Handlebars

Shorty handlebar riser kit, 1.5 inches tall. for 1.25 inch handlbars

SHORTY RISER KIT - V-FACTOR

Chrome plated risers for custom applications.
1 1/2" tall.

Part #: M41002 - Chrome Plated Kit, Fits 1 1/4" handlebars on FXSTC 2006/Later ... $46.15
Straight Riser Lower Clamp set for FXWG
STRAIGHT RISER LOWER CLAMP SETS FOR FXWG - V-FACTOR

4 1/2" OE style Risers fit all FXWG with 3 1/2" center to center riser spacing. These risers can also be used for necessary clearance when mounting Fat Bob gas tanks. Threaded for 1/2-13 mounting bolts or studs.

Part #: M41025 - Chrome Plated Set, Fits FXWG 1980/1986 & custom applications, Replaces HD# 56063-82A ... $35.00
Pullback riser lower clamp set for Big Twin or Sportster.
PULLBACK RISER LOWER CLAMP SET FOR ALL MODELS - V-FACTOR

1 1/2" pullback and 4 1/2" rise.
Allows handlebars to clear Fat Bob tanks.
Uses 1/2-13 mounting bolts.
Accepts stock upper handlebar screws or our screw kit found in the control section of the Mid-USA catalog (give us a call).
Use with stock or custom handlebar clamps.


Part #: M41101 Chrome Plated Set, Fits any Big Twin or Sportster, Replaces HD# 56122-77 & 56124-77 ... $37.85

Don't see what you need?  Contact us.  Chances are we have it.  We have thousands of parts that are not shown online.

15 Percent Coupon, summer promo, Beer Machine

FLAT RATE SHIPPING APPLIES IN CONTINTENTAL 48 UNITED STATES ONLY. AK, HI and APO/FPO will have additional shipping fees. We ship within the U.S.A. and to APO/FPO (military addresses; weight and size restrictions apply.). We do not accept foreign credit cards. Please see our CONTACT page for more information.

Prefer to call in your order to Steel Thunder? Call 603-237-8200.

FREQUENTLY ASKED QUESTIONS

Please note that all prices are subject to change.

***

Steel Thunder Custom Cycles

531 Bungy Road

Columbia, NH 03576

Copyright 2002-2013 Steel Thunder Custom Cycles©

 

Thank you for shopping at Steel Thunder Custom Cycles online motorcycle parts store!

 

 

 

Protected by Copyscape Duplicate Content Detection Software