|
Round Oil Tanks for Custom Use - Side Fill, 3.5 quart - Hardbody
If you are
after that traditional chopper look, then this rubber mounted steel 3.5
quart oil tank with a battery tray is the perfect choice. With
a side fill cap, they are manufactured from 16 gauge steel to resist
cracking
and 100% TIG welded for maximum strength. Each tank includes a heavy
duty front mount and a chrome fill plug. These tanks use a Softail size
battery
and our M83548* OE style rear
tank mount. For best results use our M80627* rubber
mounts and 10807 battery cushion. Designed in this tank is an extended
internal
oil return
tube
that dumps
the hot returned engine oil to the
far left side of the oil tank. This keeps the returned oil as far away
from the feed line as possible, creating an efficient circulating effect.
A lower left hand relief has also been built in that can be used with
a chain or belt drive. This tank measures 11 3/4" long and has
a 6 1/2" O.D. Fits all HARDBODY FAT-A-TUDE, chopper style and
rigid frames. Also fits OE Softail frames 1984/1999 if a front horseshoe
type
mount is fabricated and welded to the seat post. Chrome Plated.
Part#:M86075 - Side Fill with battery tray ... $226.88
*Sold at bottom of this page |
|
Custom
Round Oil Tanks - 4.5 quart without battery box, side fill - Hardbody
by Kraft/Tech
This rubber
mounted steel Oil Tank has side fill cap. The side fill tanks are designed
for easy access when adding to or checking the oil. Made from 16-gauge
steel to resist cracking, these tanks are 100% TIG welded for maximum
strength.
4.5 Quart side fill without battery box. This Oil Tank requires custom
brackets to be fabricated for frame mounting. It has two mounting locations
on the top and one on the bottom. For best results use our *M83563 rubber
mounts. All oil line fittings are threaded 1/8-27 NPT. Tank measures
11
3/8" long and has a 5 1/2" O.D. Fits custom applications and
most rigid frames . Chrome Plated. Made in USA.
Part#:M86071 - $249.31
*Sold
at bottom of this page |
|
Custom
Round Oil Tanks - 3.5 Quart with battery box, center fill - Hardbody
by
KraftTech
Rubber mounted
steel Oil Tanks with center fill and battery box. The center fill
style
was designed for the cleanest look possible by positioning it in the
middle of the tank, out of view as much as possible. Made from 16-gauge
steel
to resist cracking, these tanks are 100% TIG welded for maximum strength.
Includes heavy duty front mount and fill plug. Use with Softail size
battery
and OE style rear tank mount. For best results
use our *M80627 rubber mounts and *M10807 battery
cushion. Also uses 1/8 NPT fittings
for vent, return & feed lines, and 1/4 NPT fittings for oil drain.
These tanks feature Hardbody's exclusive oil return routing system.
They
have extended the internal oil return tube allowing it to dump the hot
returned engine oil to the far left side of the oil tank. This keeps
the
returned oil as far away from the feed line, creating an efficient circulating
effect. A lower left hand relief has also been built-in that can be
used
with a chain or belt rear drive. Tank measures 11 3/4" long and
has a 6 1/2" O.D. Chrome plated. Made in USA.
3.5 Quart center fill with battery box. Fits all HARDBODY Fat-a-tude, chopper
style, and rigid frames. Also fits OE Softail frames 1984/1999 if our *M85152 front tank mount
is used.
Part#:M86069
- $536.26
*Sold
at bottom of this page |
Raw Steel

Center
Fill or Side Fill

|
HARDBODY
CUSTOM ROUND OIL TANKS
These tanks feature our exclusive oil return routing system. The internal
oil return tube is extended allowing it to dump the hot returned engine
oil to the far left side of the oil tank. This keeps the returned oil as
far away from the feed line, creating an efficient circulating effect.
3.5 Quart with Battery Tray.
Lower left hand relief for use with a chain or belt rear drive.
Measures 11 3/4 " long and has a 6 1/2" O.D.
Made from 16 gauge steel to resist cracking.
100% TIG welded for maximum strength.
Designed for the cleanest look possible by positioning the fill in the middle
of the tank, out of view as much as possible.
Includes heavy duty front mount and fill plug.
Use with Softail size battery and OE style rear tank mount.
Uses 1/8-27 NPT fittings for oil drain.
For best results use our *M80627 rubber mounts and *M10807 battery cushion.
Fits all
HARDBODY FAT-A-TUDE, chopper style, and rigid frames. Also fits OE
Softail frames 1984/1999 if our #M85152 Front Tank Mount is used (available
below). Raw
Steel Flat Side:
#M86080 -
Center Fill ... $173.49
#M86081 -
Side Fill ... $206.81
*Sold
at bottom of this page |
NEW!
Domed
Side Round Oil Tank
Choice
of center fill or side fill

|
DOMED
SIDE HARDBODY CUSTOM ROUND OIL TANKS
These tanks feature our exclusive oil return routing system. The internal
oil return tube is extended allowing it to dump the hot returned engine
oil to the far left side of the oil tank. This keeps the returned oil as
far away from the feed line, creating an efficient circulating effect.
3.5 Quart with Battery Tray
Lower left hand relief for use with a chain or belt rear drive.
Measures 11 3/4 " long and has a 6 1/2" O.D.
Made from 16 gauge steel to resist cracking.
100% TIG welded for maximum strength.
Designed for the cleanest look possible by positioning the fill in the middle
of the tank, out of view as much as possible.
Includes heavy duty front mount and fill plug.
Use with Softail size battery and OE style rear tank mount.
Uses 1/8-27 NPT fittings for oil drain.
For best results use our 80627 rubber mounts and 10807 battery cushion .
Fits all HARDBODY FAT-A-TUDE, chopper style, and rigid
frames.Also
fits OE Softail frames 1984/1999 if our *M85152 Front
Tank Mount is used.
Part#:M86082
- Chrome Plated Domed Side with Center Fill ... $209.33
Part#:M86083
- Chrome Plated Domed Side Side Fill ... $209.33
*Sold
at bottom of this page |
|
CUSTOM
HORSESHOE OIL TANK FOR KICKSTART BIG TWIN by Paughco
Available with spin-on oil filter provision or no oil filter provision
for use with external oil filter mount.
4 quart capacity with side fill.
Measures 7" tall, 8 5/8" deep and 10" wide.
Battery compartment is 5 3/8" wide and 5 3/8" deep.
These oil tanks are designed to be used with OE style battery/oil tank
mounting plate or our 10126.
The three oil line adapter fittings are designed for OE style metal oil
lines and screw into tank but can be substituted for any 1/8-27 NPT fittings.
The drain plug hole is tapped 5/8-18 for drain plug of your choice.
Thanks include fill plug and three oil line fittings.
M86042 includes a chrome oil filter with a 5/8-18 mounting thread.
Fits Big Twin rigid frames 1936/1957 or early Big Twin swingarm frames
1958/1964 with kickstart and steel primary covers. Made in USA by Paughco.
Part#:M86042 - Chrome plated with filter provision ... $348.74
|
|
Winged
Horseshoe Oil Tank for Wide Tire Softail and Fat-A-Tude Rigid Frames -
Hardbody by Kraft/Tech
Due to the
additional width of our HARDBODY Wide Tire Softail Frames, a standard
width Winged Oil Tank would interfere with the action of the rear fork.
WE now offer these steel side fill winged oil tanks to fit your Wide Tire
Frame, in your choice of a chrome plated finish or a raw steel finish.
A chrome plated fill plug is included with both oil tanks. These oil tanks
hold slightly over 3 quarts of oil and can be used with any 1984/1996
Softail style battery. A special feature of these tanks is the Internal
Oil Routing. Rather than dumping the hot returned oil near the feed line
like most oil tanks, our oil tanks dump the returned oil to the far left
side of the tank as far away from the feed line as possible. This internal
line separation method creates an extremely efficient circulating effect
producing cooler oil temperatures.
Chrome plated. Made in USA.
Part#:M86066 - Chrome - $292.59
|
|
WINGED
OIL TANK FOR SOFTAIL & CUSTOM USE - V-FACTOR
Extended panels at the back side of this 3 quart steel
oil tank eliminates the open air look between the oil tank and the
rear fork support section
of the Softail style frame.
Part #: M86072
- Chrome Plated Oil Tank,
Fits Softail 1986/1999.
Also fits HARDBODY Rigid frames & HARDBODY standard width
Softail style. Due to rear fork interference, will not fit HARDBODY
wide
tire Softail style frames ...
$176.95
|
Raw Steel for Painting!

|
Winged
Horseshoe Oil Tank for Wide Tire Softail and Fat-A-Tude Rigid Frames -
Raw Steel - Hardbody by Kraft/Tech
Due to the
additional width of our HARDBODY Wide Tire Softail Frames, a standard
width Winged Oil Tank would interfere with the action of the rear fork.
We now offer these steel side fill winged oil tanks to fit your Wide Tire
Frame, in your choice of a chrome plated finish or a raw steel finish.
A chrome plated fill plug is included with both oil tanks. These oil tanks
hold slightly over 3 quarts of oil and can be used with any 1984/1996
Softail style battery. A special feature of these tanks is the Internal
Oil Routing. Rather than dumping the hot returned oil near the feed line
like most oil tanks, our oil tanks dump the returned oil to the far left
side of the tank as far away from the feed line as possible. This internal
line separation method creates an extremely efficient circulating effect
producing cooler oil temperatures.
Raw. Made in USA.
Part#:M86065 - Raw Steel - $201.33
|
| |
Custom
Horseshoe Oil Tank for Big Twin 4 Speed - Hardbody
by Kraft/Tech
These 3 1/2
quart side fill horseshoe oil tanks are chrome plated without the oil
filter option (for remote filter). The special feature of these side fill
oil tanks is its routing of hot returned oil from the engine. Rather than
dumping the returned oil near the feed line like most oil tanks, our tank
dumps the returned oil to the far left side of the tank as far away from
the feed line as possible. This internal line separation method creates
an extremely efficient circulating effect producing cooler oil temperatures.
These steel tanks are completely TIG welded and pressure tested for leaks
and include a welded-in battery mounting plate. Use with a 1984/1990 Softail
battery or a 1991/1996 Softail battery depending on what side you want
the positive battery terminal on. Tanks include a fill plug, drain plug
and the oil line fittings are conveniently marked for no guess work installation.
Chrome plated without filter. Made in USA.
Part#:M86030 ... $230.08
|
 |
OEM STYLE OIL TANKS
FOR SPORTSTER - V-FACTOR
High quality reproduction of the OE oil tank.
Includes chrome plated fill plug.
Note: Due to the inherent oxidation associated with the chrome plating
process, this oil tank must be thoroughly cleaned out with kerosene
or tank cleaner before putting to use.
Part #: M86047
- Chrome Plated Oil Tank,
Fits Sportster models 1983/1993. Replaces HD# 62475-83 ... $124.95
Part #: M86005 - Chrome Plated Oil Tank,
Fits Sportster models 1994/1996.
Replaces HD# 62475-94 ... $143.25
Part #: M86006 - Chrome Plated Oil Tank,
Fits Sportster models 1997/2003.
Replaces HD# 62475-97 ... $137.60
|
|
|
BRASS
ROCKER BOX OIL LINE KIT FOR SHOVELHEAD - OLD-STF Cycle
Adds a cool vintage look to your Shovelhead engine.
Made in the USA by our friends at OLD-STF Cycle.
Includes teflon tape and installation instructions.
Part #: M83192 - OLD-STF Cycle
Brass Oil Line Kit, Fits Shovelhead 1966/1984 ... $69.99
|
| Oil Filters, Oil Coolers, Combos,
Adapter Kits, Mounts, etc. can be found HERE |
|
OIL
TANK CAP FOR BIG TWIN & SPORTSTER
Chrome Plated Oil Tank Cap with gasket.
Will fit OE style oil tank on all Harley-Davidson, FL & FX models 1953/Early
1982 and KH & Sportster 1954/1978.
Part #: M85009 - Replaces HD# 62610-52TA ... $35.00
|
|
Optional
Purchases (Please Note: we have a $35 minimum for all
purchases. Take advantage of our Flat Rate Shipping of $12.95 per order,
and get
everything you need now.) : RUBBER
MOUNTS FOR BATTERY CARRIER TRAY - V-FACTOR
Rubber
mounts designed to help isolate vibration transmitted to the battery
carrier tray.
Also used for mounting instrument dash panels and oil tanks.
All American made (D&S Performance mounts exceed OEM specifications
and feature a manufacturer's two year warranty.
OE style Super/Heavy Duty with internal spring welded to each stud plate.
Thread Size & Length: 1/4-20 x 1/2" Male/Male Mount.
Fits Big Twin 4 speed 1965/1986, XLH 1967/1978, XLCH 1970/1978.
Part #: M80627 - Package
of 10,
Replaces HD# 62563-65 ...
$30.84
______
RUBBER MOUNTS FOR BATTERY
CARRIER TRAY - V-FACTOR
Rubber mounts designed to help isolate vibration transmitted to the battery
carrier tray.
Also used for mounting instrument dash panels and oil tanks.
All American made (D&S Performance mounts exceed OEM specifications and
feature a manufacturer's two year warranty.
Custom Style, Designed for use with our round oil tanks but works great anywhere
an oversize threaded stud is needed.
Threaded Studs measure 5/16-24 x 3/4" long.
Part #: M83563- Package of 3 ... $5.90
______
FRONT
MOUNT FOR ROUND OIL TANK - V-FACTOR
Mounts
to the downpost for a simple way to attach the front of the oil tank.
1/4" thick steel for maximum strength.
Part #: M85152 Chrome
Plated Mounting Bracket,
Fits Softail 1984/1999 with battery tray type round oil tank ... $9.52
______
HORSESHOE
OIL TANK MOUNTING PARTS FOR EARLY BIG TWIN - Paugcho
Top quality
reproduction parts necessary to mount the OEM horseshoe oil tank on Big
Twin models 1936/1964 as listed.
Also used on Paughco and custom oil tanks. Chrome
Plated.
Part #: M10126
- Battery
Tray & Oil Tank Plate,
Fits Big Twin 6 volt Rigid & Swingarm frame 1936/1964.
Replaces HD# 62575-36 ... $43.59
_____
BATTERY
CUSHION FOR ALL MODELS - V-FACTOR
Made out of
high quality neoprene foam, which is non-absorbent and retains its shape
well under pressure without flattening.
Has adhesive stick backing to make sure it stays in place.
Part #: M10807 - 5" x 8" Cushion, Replaces HD# 66103-74A
... $6.95
|
Love your Engine!
Case of 6 one quart bottles.

|
HIGH
PERFORMANCE ENGINE/TRANSMISSION/PRIMARY OIL FOR ALL MODELS - Lucas
Oil Products
20W-50
Viscosity, Synthetic
Lucas Motorcycle Oil is built for endurance, lasting up to 4 times
longer than other brands. It will also lower oil temperatures,
extend the life of vital components, reduce noise and leaks and increase
performance.
Our SAE 20W-50 is also an excellent gear oil and primary oil.
All Lucas motorcycle oils meet or exceeds: API SG/SF/CC/CD, JASO MA, ACEA
A3 specifications. Official oil product of NHRA.
A 100% synthetic oil. Made in the U.S.A.
For use in Evolution & Twin Cam models, and all air-cooled or water-cooled
4-stroke engines calling for a 20W-50 motor oil.
Part#:M05021- Lucas Oil, 20W-50 Viscosity, Synthetic, 1 quart bottles, Pack
of 6 ( Note: Not Shippable by Air.) ... $70.56
|
| We
have thousands of parts, too many to post on this website. Don't see
what you need? Give
us a call or send us an email. CONTACT |