
Lizard
Lights

DS2040-0213
Starter Kit

DS2040-0214
Expansion Kit
|
LIZARD
LIGHTS
A spectacular
new custom lighting idea from Kuryakyn.
Three modes of operation and seven different colors: single-color steady
illumination; single-color flashing illumination with a variable flash
rate; and paint mode – all lights, in unison, fade into and out
of seven colors (red, lime, ice blue, sky blue, dark blue, purple and
green).
You control the rate at which the lights flash or fade with included rheostat
switch control.
Engineered to draw minimal current.
Up to 16 individual lights can be operated with one controller.
Starter kit includes: four Seven Color Lizard Lights,
controller, four 9” extensions, two 12” extensions, alcohol
pads, dielectric grease, cable ties and spare adhesive pads.
Expansion kits include: two Seven Color Lizard Lights,
two 12” extensions, two Y-connectors, two double male connectors,
two double female connectors, alcohol pads, dielectric grease, cable ties
and spare adhesive pads.
Part#: DS2040-0213 - Starter kit...$161.95 including
shipping*
Part#: DS2040-0214
- Expansion kit ...$97.95 including shipping*
Note: Seven Color Lizard Lights are not compatible with
Moon, Spider or Flex lights.
THIS
IS A SPECIAL ORDER ITEM. WHILE MOST OF OUR ITEMS SHIP THE SAME OR NEXT
BUSINESS DAY, THIS ITEM WILL TAKE A FEW EXTRA DAYS TO SHIP. SPECIAL
ORDERS CANNOT BE EXPRESS SHIPPED. NO RETURNS.
This
item appears on page 614 of the Drag
Specialties Fatbook. We carry everything in the Fatbook, as well as
all the items in the catalogs on this page.
|
|
12
VOLT LED LIGHTING FOR CUSTOM USE - ElectroPods
Low Current
Draw.
Makes your bike more noticeable and visible.
Super bright LED lights that are water and vibration resistant.
Each mini pod unit contains 6 LED lights that are "fanned out"
for maximum area illumination.
Each linear strip has 6 LED lights in a row.
All kits include: water resistant on/off switch, fuse holder, necessary
wiring, foam mounting tape, cable ties and complete instructions.
Complete kit contains 6 Mini Pods with 1 1/2" x 1" Black Oval
Housings & 2 Linear Strips with 8 x 3/4" Rectangular Housing.
Part#:MU14216 - Complete Kit with Red LED Color (call
for availability) ... $81.70 including shipping*
Part#:MU14217 - Complete Kit with Blue LED Color
... $81.70 including shipping*
Part#:MU14218 - Complete Kit with Purple LED Color
... $81.70 including shipping*
|
| |
Radiantz
Tank Lights Roach Kits
- Undertank
lighting kit.
- Easy to
hide and install.
- Peel and
stick into place.
- No drilling
necessary.
- Choose
from red, amber, blue, green and white.
- Price
includes free shipping*.
| Color |
Part
# |
Price |
Buy
Now |
| Red |
TR49-6684 |
$149.95 |
|
| Amber |
TR49-6685 |
$149.95 |
|
| Blue |
TR49-6686 |
$149.95 |
|
| Green |
TR49-6687 |
$149.95 |
|
| White |
TR49-6688 |
$149.95 |
|
|
|
Trucker
Mud Flap Girl License Plate Assembly with Tag Light - Choppers Inc.
- Manufactured
out of 6061 T-6 billet polished aluminum.
- Features
a groove in the backing plate to hide the wires.
- Milled
frame is recessed to allow space for the license, but provides a flush
seam on the edges.
- Since
there is no mount bracket, you decide where you want to put it on your
bike - center-on-fender or side mount.
- Made in
the U.S.A.
- Not D.O.T.
approved.
Part #DS2010-0252
... $521.96 including shipping*
Please note: This is a special order item. While most items ship the
same or next business day, this item will take a few extra days to ship.
No express delivery is available. No returns on Special Order items. |
|
Dice
Taillight/Licence Mount for Custom Use from Choppers, Inc.
CNC machined from 6061 T-6 billet aluminum for maximum strength.
Uses 12 volt incandescent light bulb for brake/running light and license
illumination.
A mounting bracket is not provided and must be fabricated for placement
where necessary.
Polished. Fits all 7" x 4" license plates. Made in USA.
Dice. Part#:MU11236 ... $445.05 including free shipping* |
|
Vertical
Axle Mount Taillight/License Assy for Softail - LED
This heavy
duty Chrome Plated Side Mount Assembly is manufactured from billet aluminum
then show chromed for an unequaled look. The 20 LED lights emit a beacon
that can't be missed by trailing traffic. The axle spacer/adjuster stop
is incorporated into the license plate backing plate for a clean look
and includes a special spacer that will allow for a 3/4" O.D. axle
or a 1" O.D. axle. Hidden allen head lock screws secure the license
plate from the backside furnishing you with a smooth boltless look. Fits
Softail 1986/1999.
Vertical - Part#:MU11229 - $177.32 including shipping*
|
|
CHROME
PLATED BILLET DIAMOND LED TAILLIGHT/LICENSE MOUNTS FOR SOFTAIL & CUSTOM
USE
CNC machined from billet aluminum.
Includes 31 super bright red LED lights for the running light function
and one white LED that illuminates the license plate.
A 4" x 7" license plate will slide in from the bottom and is
secured by two hidden set screws.
15" lead wires.
Softail 1986/1999 & Custom Rigid frames that incorporate a Softail
slotted style axle adjuster spacer. Mounts on left side of axle and can
be used with a 3/4" O.D. or 1" O.D. axle.
Part#:MU11238
... $189.06 including free shipping* |
|
Vertical
Side Mount License Holder with Light - Kuryakyn
If they
zig, you can zag by moving your license plate off the rear fender to the
side. This side- mount license holder with light creates a show-like look
and adds visibility with a red L.E.D run & brake light complete with
license plate illumination. Its smooth design shows no visible fasteners
around the plate. Removable inserts allow it to accommodate both small
(4" x 7") and large (4-3/8" x 8") plates.
Note: P/N DS2010-0191 works with or without our chrome swingarm cover
kit.
Part #DS2010-0191 - Vertical Side Mount License Holder with Light.
For '86-'06 Softail Models. ... $135.96 including shipping*
INSTALLATION
INSTRUCTIONS
Part #DS2010-0192 - Vertical Side Mount License Holder with Light.
For '90-'05 Dyna and '86-'06 XL (Sportster) models. ... $135.96 including
shipping*
INSTALLATION
INSTRUCTIONS
Please
note: These are special order items. While most items ship the
same or next business day, these items will take a few extra days to ship.
No express delivery is available. No returns on Special Order items. |
|
NESS-TECH® LED
TAILLIGHT/ LICENSE PLATE - Arlen Ness
Carved
from 6061 T-6 billet aluminum.
Blind-hole license plate frame for a clean look.
Dual-function LED taillight with tag light.
Mounts to most custom fenders (not for stock or bobbed fenders).
Includes hardware.
Part #: 060902-0302 - ASSEMBLY Jet-Eye style ... $512.95 including free
shipping*
|

"Bobber"
look with modern tech! |
SPARTO
STYLE TAILLIGHTS FOR CUSTOM USE - LED
- V-Factor
- Chrome
Plated
- Provides
the bobber look of years gone by
- Made
from cast aluminum
- Includes
rubber mounting gasket and hardware
- 19 Individual
LED Lights
Part#:MU11246
- Taillight Assembly ... $69.95 including shipping*
|
| |
Retro
"Drilled" Taillight- Jammer Cycle Products
A very cool
12 volt taillight for use on custom bike builds. Features a "drilled"
billet housing, license plate illumination and mounting/license plate
bracket. Taillight measures 2-3/4" wide x 1-1/4" deep.
#CC632507
- Retro "Drilled" Style Taillight, 12 volt ... $140.46 including
shipping*
|


Bottom
Side View
|
SUPER
THIN LED CATEYE TAILLIGHT FOR CUSTOM USE - V-Factor
Chrome Plated.
Super thin design measures a mere 5/16" thick.
CNC machined from billet aluminum.
1/4" studs mount on 2" centers.
Features 30 red LED bulbs for the running/brake light function & 6
white LED bulbs for license illumination.
Lens meets DOT & EU requirements.
Includes 18" of lead wire.
Part#:MU11247 - 5/16" Thick Taillight with Hardware ... $62.95 including
shipping*
|

Shallow
Housing
|
SKULL
CATEYE TAILLIGHT FOR CUSTOM USE -
V-Factor
LED (Light Emitting Diode) Technology permits the use of the shallow housing
(1" thick) for a whole new minimalist look.
Includes 33 red LEDs for the brake/running light function and 6 separate
white LEDs to illuminate the license plate.
Die cast housing features a four step design.
Flat backed housing for custom use mounts on 2" centers.
12 volt. Chrome plated.
Part#: MU11233 - Skull Cateye Taillight ... $71.60 including shipping*
|
|
DIAMOND
LED TAILLIGHT ASSEMBLY FOR CUSTOM USE
This LED diamond type taillight has a flat back housing with two 1/4"
x 20 mounting studs spaced on 2" centers. Die cast housing with clear
license window. 12 volt taillight with approximately 7 1/2" of lead
wire. L 5 1/2" x W 2 3/4" x H 2 1/4".
LED 12 volt taillight. Chrome plated.
Part#:MU11231 ... $81.60 including shipping* |
|
Wide
Tombstone Taillight with LED Array - fits Big Twin and Sportsters
Our new wide
tombstone LED taillight has the styling of the original equipment taillight
except it has been redesigned to fit 1973 & later OE fenders. Fits
all Big Twin models 1973 thru 1999 (except FLSTS & models with Fat
Bob style rear fenders) and Sportster models 1973 thru 1998. Models with
fender mounted turn signal light bar require relocation of the light bar.
Sold each.
#MW8-192
- Wide Tombstone Taillight with LED ... $91.46 including free shipping*.
|



|
LED
JET-EYE TAILLIGHT/TURN SIGNAL ASSEMBLY - Arlen Ness
- Chrome-plated
die-cast housing.
- Stretched
Cat Eye design.
- Available
as a complete kit or individual pieces.
DS0902-0161
Taillight/turn signal assembly w/ backing plate ... $207.86 including
shipping*
DS0902-0160 Taillight only (6 1/2” W x 1 5/8” H x 1”
thick) ... $128.76 including shipping*
DS0902-0162 Turn signals only (pr.) (1 3/4” W x 1 5/8” H x
1” thick) ... $81.95 including shipping*
Note:
Not DOT approved. Please note: These are special
order items. While most items ship the same or next business day, these
items will take a few extra days to ship. No express delivery is available.
No returns on Special Order items. |
|
Maltese
Cross II LED Taillight by Paul Yaffe Originals
If you thought
the original Maltese Cross Taillight (below) was cool, check out the Maltese
Cross II! Features sequential turn signals in the right and left arms.
Mount this taillight on your rear fender and the turn signals are built
right in. Super bright LED's and exclusive PYO strobing brake light along
with waterproof solid state circuitry, makes for safety. Machined from
6061-T-6 billet aluminum and flawlessly chrome-plated. It measures 4 x
4 inches and is 1 inch deep. The back of the light is flat, so a steel
shadow box is available for frenching applications on radiused surfaces
such as fenders (sold separately).
#DS2010-0090
- Maltese cross II taillight with turn signals ... $539.96 including shipping*
#DS2010-0089
- Flush mount shadow box ... $51.95 including shipping*
NOTE: Load
equalizer for bikes with self-canceling functions required.

|
|
Maltese
Cross Taillight for custom use.
The Maltese
Cross Taillamp is still a biker favorite. The sturdy die cast chrome plated
housing has a flat back for easy mounting and includes 5/16 inch mounting
bolts on 2 inch centers. Taillamp measures 4inches tall x 4 1/8 inches
wide and is 1 7/8 inch thick. A clear license window is also provided.
Part #MU11212
- 12 volt assemblies with an automotive bulb ... $24.60 including shipping*
Part#MU11232
- LED type ... $58.65 including shipping*
|
|
TAILLAMP
WITH BUILT-IN TURN SIGNALS FOR CUSTOM USE
CNC machined from billet aluminum, this custom 12 volt Taillamp is the perfect
complement for a Fat Bob style rear fender. It features built-in turn signals
and includes a separate window that illuminates the license plate. The taillamp
has a flat back with a 1" protrusion for the taillamp socket and mounts
on 2 1/2" centers. 29" of taillamp lead wire is included and the
turn signals include 10" of wire. Assembly measures 6 5/8" long
x 3" tall x 1 13/16" thick. Chrome plated.
Part#:MU11222 ... $107.56 including free shipping* |
|
Aurora™
Taillight and Turn Signal Assembly, designed by john reed
Hot Custom Look, Hidden Lens Mounts, Exclusive Custom
Chrome lighting system that blends taillight, stop light and turning indicators
into one gleaming sculpture. Matching front turn indicators provide a
total custom look that makes your bike stand out in a crowd. Die-cast,
chrome plated taillight is available with or without turn signals. Fits
all models with stock taillight mounts from 1973 to present (except Fat
Bob fenders or late 'Dresser' models with stock saddlebags). Easily adapted
to smooth custom fenders.
#CC27000 - Complete taillight and turn signal kit with
single filament turn signals and red lenses ... 264.85 including shipping*
|
|
COMPLETE
TURN SIGNAL LAMP KITS FOR BIG TWIN AND SPORTSTER - Chris Products
"CHRIS PRODUCTS" Complete turn signal lamp kits for Big Twin and
Sportster. Fits FX, FXR and Sportster 1973/1985. 12 volt single or dual
Filament kits contain: 4- Amber Lamp Assemblies 2- Handlebar Clamps 2- Brackets
for Lamps 2- Rear Support Kit 2- Extra Red lenses. Chrome plated. DOT approved.
Price includes shipping*.
| Model
& Year |
Bulb
Type |
Part
# |
Price |
Buy
Now |
| FX,
FXR & Sportster |
Single
Filament |
MU11604 |
$99.35 |
|
| FX,
FXR & Sportster |
Dual
Filament |
MU11605 |
$101.50 |
|
|
|
Series
2000 Chrome Billet Marker Lights - Joker Machine
- Smooth
bullet-shape with 12V single-filament bulbs and amber lens.
- Center
mount design can be rotated 360 degrees and is held in positron with
a set screw.
- Made in
the U.S.A.
Part#: DR-DS280176
- Pair of Marker Lights ... $126.96 including shipping* NOTE: These
are a special order item; while most items ship the same or next business
day, these will take a few extra days to ship. No express shipping
available. No returns.
|
|
FORK
TUBE MARKER LAMPS FOR MOST MODELS
Designed to clamp directly onto the fork tubes without disassembly of
the front end. These chrome plated die cast marker lamps include amber
lenses and a blacked out speed line on the side. Available with a single
12 volt bulb for use as running lights or turn signals only or available
with dual 12 volt bulbs for simultaneous use of running and turn signal
lamps. The included plastic sleeves permits use on 41mm, 39mm, and 35mm
fork tubes. Sold in pairs.
Fork tube marker lamps for most models. Choice of Single or Dual bulb.
Chrome plated.
#MU11427 - Pair of Single Bulb Fork Tube Marker Lights ... $79.30 including
shipping*
#MU11428
- Pair of Dual Bulb Fork Tube Marker Lights ... $81.20 including shipping*
|
| 
DRDS-280283

DRDS-280185

DRDS-280186

DRDS-280187

DRDS-280188 |
TRIPLE
TREE MARKER LIGHT BARS - Pro One
Chrome-plated
light bars feature amber lights.
Fit between the fork tubes on Wide Glide or narrow glide front ends.
Mount to the headlight bolt.
Made in the U.S.A.
FOR
WIDE GLIDE (FXWG, FXST, FXSTC, FXDWG)
DRDS-280283 - Original ... $99.95 including shipping*
DRDS-280185 - Smooth Millennium... $99.95 including shipping*
DRDS-280186 - Ball-milled Millennium ... $99.95 including shipping*
FOR
NARROW GLIDE (FL, FX, XL)
DRDS-280187 - Smooth Millennium ... $99.95 including shipping*
DRDS-280188 - Ball-milled Millennium ... $99.95 including shipping*
Note: May require the use of a load equalizer to function
properly.
Please
note: These are special order items. While most items ship the
same or next business day, these items will take a few extra days to ship.
No express delivery is available. No returns on Special Order items. |
|
DELUXE
2” SPOTLIGHT - Headwinds
CNC-machined T-6 chrome-plated billet aluminum.
Features a seamless housing with a 35W halogen reflector bulb.
Made in the U.S.A.
Replacement sealed beams and bulbs available.
Sold in pairs.
Prices include shipping*.
| Part
# |
Style
2" Spotlight |
Price |
Buy
Now |
| 060901-2800 |
Smooth
concours rocket |
$222.86 |
|
| 060901-2900 |
Mariah
concours rocket |
$249.86 |
|
| 060901-2901 |
Vampire
concours rocket |
$249.86 |
|
|

060901-2424

060901-4210

060901-4214

060901-4211

060901-2406
|
BILLET
SPOTLIGHT BAR/LOWER TREE COVER - Headwinds
CNC-machined T-6 chrome billet aluminum.
Machined grooves hide spotlight wires.
Mounts to the bottom of OEM triple trees; hides the underside of the cast
surface.
Includes mounting hardware.
Made in the U.S.A.
For
use with 2” or smaller spotlights.
Prices include shipping*.
| Part
# |
Fitment |
Price
|
Buy
Now |
| 060901-2424 |
For
84-07 FLSTF, FLSTN, FLSTC |
$147.26 |
|
| 060901-4210 |
For
84-07 FXST, FXWG, 93-05 FXDWG |
$123.86 |
|
| 060901-4214 |
For
00-07 FXSTD |
$123.86
|
|
| 060901-4211 |
For
87-07 FXR, XL (Sportster), 91-05 FXD |
$123.86 |
|
| 060901-2406 |
For
94-07 FLHR |
$147.26
|
|
|
   |
MINI-NEON
ACCENT LIGHT KITS FOR CUSTOM USE - Street Glow
Achieving a neon glow in those tight, hard to install, areas on your motorcycle
is now possible with one of these 6" long or 9" long Mini-Neon
Lighting Kits. These kits include two .440" O.D. tubes with an impact
resistant LEXAN jacket and attach at each end with the provided screws.
Each neon tube has three feet of wiring with ends that simply plug into
the transformer. The transformer measures a mere 2"X2"X1"
and includes 8' of lead wire. It can be attached with screws or double stick
tape (both included). The power draw on your 12 volt system is only 350
miliamps or less for the 9" kits and 300 miliamps or less for the 6"
kits. Includes mounting hardware, instructions and lifetime warranty against
defects in material and/or workmanship by the manufacturer.
"STREET GLOW" Mini-Neon Accent Light kits for custom use.
Choose size and color below. Shipping included in price*. |
Length
and Price |
Blue
Part # |
Buy
Now |
Purple
Part # |
Buy
Now |
Red
Part # |
Buy
Now |
6"
Kit ... $62.55 |
MU11440 |
|
MU11439 |
|
MU11441 |
|
9"
Kit ... $67.40 |
MU11435 |
|
MU11434 |
|
MU11436 |
|
|