Steel Thunder Custom Cycles motorcycle parts

 

Shopping Pages:

Control Section:

Brakes, discs, rotors, dashes & instrument panels, gauge brackets, footpegs, forward controls, grips, throttle control, handlebar controls, handlebars, levers, linkage, levers, mirrors, risers, shift & jockey control.

Drivetrain Section:

Belt drives, belt drive covers, clutch kits, chain drives, drivetrain packages, kick start transmission, offset sprockets, points, derby & ignition coves, primary belts, primary chains, primary covers, pulley & brake combo kit, rear drive belts, Sportster performance parts, six speed conversion, rear sprockets, rotors, transmissions & parts.

Electrical Section:

Battery related, battery tenders, charging systems,coils & mounts, dash/instrument panels, speedos, tachs, terminal kits, electronic ignitions, handlebar switches, headlights, horns, lighted license plate mounts, lighting, starter motors, taillights, turn signals, wiring harnesses.

Engine Section:

Motorcycle engine parts, drivetrain packages, cams & cam side parts, big bore kits, big bore piston kits, Sportster engine parts, motor mounts, drivetrain section, engine mounts.

Exhaust Section:

Exhaust pipes listed by model, exhaust accessories, insulating wrap, mufflers, extensions, high heat spray, heat shields, clamps and mounts.

Frame/Body Section:

Frames listed by style, engine mounts, fenders, struts, floorboards, foot rests, pegs, frame covers, hardtails, highway bars, kickstands, lowering kits, seats listed by model, shocks, sissy bars & pads, swingarms.. Also, Rolling Chassis Kits.

Front End Section:

Complete front fork assemblies, fairings & fairing accessories, fork brackets/triple trees, fork tubes, sliders, fork legs, boots, springer front ends & parts, wide glide kits.

Fuel Section (Gas, Oil, Air):

Air cleaners & covers, breathers, carburetors & rebuild kits, fuel injection control, gas tanks, gas caps, gas tank cleaner/prep systems, oil, oil coolers, oil line kits, oil pressure & tank gauges, oil pumps, oil tanks, , velocity stacks.

Saddlebag & Windshield Section:

Saddlebags listed by manufacturer, windshields

Wheel Section

Tires,  tire size chart, 40, 60 & 80 spoke wheels, solid wheels.

General Merchandise Section:

Catalogs, covers, gift certificates, gift suggestions, goggles & eyewear, hardware, luggage racks, motors, motorcycle covers, security, locks & alarms, tools, trailer accessories, ramps, wheel chocks, trailer hitches to put on motorcycle.

Other Pages:

Fun, Photos & Links Section:

Photos of our customer's motorcycles, including bike kit builds, trike build link, free biker ecards, jokes, banner links, text links, link to us, webmaster's awards.

Tech & Info Section

Tech tips, tire size chart, engine break-in, suspension & shocks info, rake and trail calculator, contact page, frequently asked questions (FAQ), our credentails, terms & conditions of sale, disclaimer, international shipping policy.

Secured by SSL - an authentic COMOCO site.

 

link

 

 

 

NEW FLAT RATE SHIPPING!  No hidden fees and NO TAX! Only $12.95 in the continental. U.S., no matter how large (or heavy) your order is!  Save $$$ ... order everything you need NOW! 

Sitemap and Search Home Page Contact Us Sportster Section Catalogs

Hardbody Springer Front Forks & Springer Parts
for your American V-Twin Custom or Harley Davidson Motorcycle

If you are not sure about fitment, please write our tech. We want to ship you the right parts the first time!

CLICK HERE FOR MORE SPRINGER FRONT ENDS (Custom Chrome) AND HERE (V-Twin)

What Mid-USA's Hardbody Springers offer that the other brands do not:

*Mid-USA Springers are manufactured with 1" diameter front leg and the piece forged rear leg for superior strength.

*Forged rodkers include zerk grease fittings.

*Mid-USA Springers include axle, spacers and hardware.

PLEASE NOTE THAT SPRINGER FRONT ENDS DO NOT HAVE RAKE OR TRIPLE TREES. 

ALL FRONT END PARTS WILL NEED TO BE CHANGED IF YOU SWITCH TO A SPRINGER.

Available in Black or Chrome or Black and Copper

Copper and Black Springer front end

BLACK AND COPPER

Springers in black or chrome from Mid-USA.  We've got the best price on Springer front ends!  Cheap prices on Quality Springers.

BLACK AND CHROME, CHROME

Click image or here to see larger.

Detailed views of Generation III Black and Copper Springer front end by Hardbody

Included copper axle with springer front end.

 

Wide Style Springer shown installed

 

Included 3/4 inch O.D. Front axle kit.

 

GENERATION III WIDE STYLE SPRINGER - Hardbody

Specifications:

  • Fully assembled
  • Measures 9 1/2" between rockers (wide glide)
  • 3/4" axel spacers and hardware (included)
  • Left or right side brake
  • Forged rockers include Zerk grease fittings
  • Riser mounts 4 3/4 center, threaded 1/2-20
  • Forged one piece rear leg
  • 1" o.d. neck stem
  • Forward leg 1" (round)

Fitment:

  • Custom springers are not model specific and will require skills to install
  • Zero rake
  • Springers are measured from lower neck bearing to axle
  • Wheel with 3/4 axle needed (wide glide is best)
  • 130 width front tire maximum
  • Uses bottom mount headlight
  • Must use caliper for springer
  • 52-81 Sportster will need neck kit part #36652 (sold below)
  • Will not fit '04 and newer Sportsters
  • Will not fit Dyna

BLACK & COPPER:

Part #: BCStdSpr - Black & Copper Springer - Stock 31" Length ... $595.95 including free shipping   Limited Quantities in stock

Part # M35234 - Black & Copper Springer, -2" Length, 22" Dimensions ... $593.60 including free shipping on this item

Part# M35236 - Black & Copper - 4" Length ... $593.60

CHROME OR BLACK:

Length Finish Part #

Sale Price

Buy Now
-4" Chrome M35209 $535.00

-2" Chrome M35211 $535.00

Stock (31") Chrome M35212 $535.00
+2" Chrome M35213 $535.00
+4" Chrome M35214 $545.00
+6" Chrome M35215 $545.00
+8" Chrome M35221 $545.00
-4" Black M35210 $493.95
-2" Black M35216 $493.95
Stock (31") Black M35217 $493.95

Out of Stock (No ETA)

+2" Black M35218 $493.95
+4" Black M35219 $502.95 Out of Stock (No ETA)
+6" Black M35220 $502.95
+8" Black M35227 $514.95

Springer, detail showing Chrome springs on black front end.

Black Hardbody Springer comes in various lengthsThe rear leg is a solid forging, not 2-pieces welded together.

 

Hardbody antique springer front end for  American motorcycles.

Upper ZIrk Fittings shown on antique springer front end from Hardbody.

Lower Zirk fittings on new antique springer front end.

Included 3/4 inch outside diameter front axle kit.

How to determine Springer Front End length.

NEW! HARDBODY ANTIQUE SPRINGER FOR CUSTOM APPLICATIONS

  • Fully assembled with in-line top bracket without built in rake (0° rake)
  • The standard length Springer (20" measured from the bottom bearing to the axle center) is comparible to vintage FL model fork length
  • 1" O.D. steering stem designed for Timken® type bearings
  • Use ou rpart #36652 neck cup conversion kit to install Springer on K Model and Sportster 1952/1981 (sold below).
  • Measures 8 3/4" between the axle rockers
  • Includes axle
  • Rise mounts are on 4 3/4" centers and threaded 1/2-20
  • Universal brake rod mount is on the left rear leg
  • Includes vintage style shock mount
  • Gloss Black or Chrome
  • Zerks grease fittings on rockers

IN STOCK SOON, PRE-ORDER NOW!

Part #: M35235 - Chrome Plated Springer, 20" length. Note: Same as vintage FL ... $869.12

Part #: M35237 - Chrome Plated Springer, 22" length ... $889.38

Part #: M35238 - Chrome Plated Springer, 24" length. Note: Same as modern FXST Softail ... $889.38


Part #: M35239 - Chrome Plated Springer, 26" length ... $901.18

Part#: M35240 - Gloss Black Springer, 20" length. Note: Same as vintage FL ... $791.36

Part#: M35241 - Gloss Black Springer, 22" length ... $799.81

Part#: M35242 - Gloss Black Springer, 24" length. Note: Same as modern FXST Softail ... $799.81

Part#: M35243 - Gloss Black Springer, 26" length ... $940.98

Springer Accessories:

NEW! At Last!

Now you can put a Springer front end on your Sportster (52/81)!

Neck cup conversion kit for Sportster fits K modesl and XL 1952-1981.  Now early sportsters can cange front ends to springers and more!

Fits K Model & Sportster 1952/1981

NECK CUP CONVERSION KIT FOR SPORTSTER - OLD STF

Use this conversion kit when installing a Big Twin or late Sportster 1" neck fork assembly on your early Sportster.
Allows easy installation of our Hardbody® springers as well.
Simply remove your existing cups and install these steel cups into your frame neck and you are ready for Big Twin forks!
Includes Timken® bearings and races.

Part #: 36652 - Old-STF - Raw Steel Neck Cup Conversion Kit.
Fits K Model & Sportster 1952/1981 ... $122.85

Removable Front Fender Mounts for Hardbody Wide Custom Springer Front End, Chrome.

Black removeable front fender mounts for Springer.

Removable front fender mounts shown installed on wide springer front end.

HARDBODY REMOVABLE FRONT FENDER MOUNTS FOR WIDE CUSTOM SPRINGER (Above) - Hardbody

Allows easy front fender installation on our HARDBODY springer found in the front end section.
Also fits other brands of wide custom Springers with similar front leg diameters as listed.
Use with our M22415 front fender found HERE or your choice of custom fenders with 5" wide mount and 5/16" holes on 2 5/8" centers.
Rubber inserts are included to protect the fork's finish.
CNC machined from billet aluminum.
Fender Mount Kit. 

Fits: Leg O.D. Finish Part # Price Buy Now
 8"/18" over  .950" Chrome M35316 $89.95 Limited Qty.
Black M35317 $79.95 Limited Qty.

Shock Mount Kit for Hardbody Springers, shown on black springer front end.

Chrome plated shock and mounting kit for Hardbody brand springers.

Shock Mount Kit for Hardbody Springers - Hardbody by Mid-USA

Patent Pending.

Kit bolts on to Hardbody Springers (above) for greater control of spring action and smoothness of ride.

Part #M35310 - Shock Mount Kit for HARDBODY Springers, Chrome Plated ... $95.95

Smooth top risers for wide springers.

Risers shown on springer front fork.

SMOOTH TOP RISER FOR WIDE SPRINGER FORKS - V-Factor

Chrome Plated.
Fit 1" Handlebars.
2" O.D. smooth cap screws into top clamp hiding clamp pinch bolts.
Billet 6061-T6 aluminum 1 1/2" round body.
Through-bolt design for easy installation.
Includes 1/2"-20 allen head bolts.

Part#:M41033 - 4" Tall Risers ... $110.38

Part#:M41034 - 6" Tall Risers ... $114.98

NEW! For Springers.

Springer risers in heights from 3 to 12 inch rise.

SPRINGER HANDLEBAR RISERS FOR CUSTOM USE - V-FACTOR

Just like the risers shown above, but for Springer Front Ends. More heights! Fits 1" handlebars. Aluminum construction for light weight. Chrome Plated.
Springer risers include 1/2-20 socket head screws and washers.

Height
Part #
Price
Buy Now
3"
M41009
$63.45
4"
M41008
$69.95
5"
M41016
$72.45
6"
M41007
$75.60
8"
M41006
$88.20
10"
M41017
$106.85
12"
M41018
$114.15

Fits Mid-USA Springers

Narrow Front Fender for FX, FXR, XL. Raw.

Narrow Front Fender for FX/FXR/XL

Replaces 59031-83. Fits FX, FXR and XL (Sportster) models 1973 to 2003 with either 35 or 39mm fork tubes. Custom narrow front fender with raw finish. For use with 18", 19" or 21" rims. Also fits Mid-USA Springers. Part #KW11300 ... $49.95

(Go to Sportster Fenders page for more XL fenders.)

CLICK HERE FOR MORE SPRINGER FRONT ENDS (Custom Chrome) and HERE (V-Twin)

Please Note:  We carry replacement parts for early springers & wide style springers.  Give us a call. 603-237-8200.

See Soncy Pit Coolers 18" tall handlebars for Springer Front end and 'Dawg Bone' style risers for Springer Softails on our Handlebars & Risers Page.

Windshield for Springer FXSTS 88/L can be found here. (near bottom of page)

Don't see what you need?  Contact us.  Chances are we have it.  We have thousands of parts that are not shown online.

PLEASE NOTE: We Do NOT Backorder. If your item is not in stock, you will be notified and given a refund.

15 Percent Coupon, summer promo, Beer Machine

FLAT RATE SHIPPING APPLIES IN CONTINTENTAL 48 UNITED STATES ONLY. AK, HI and APO/FPO will have additional shipping fees. We ship within the U.S.A. and to APO/FPO (military addresses; weight and size restrictions apply.). We do not accept foreign credit cards. Please see our CONTACT page for more information.

Prefer to call in your order to Steel Thunder? Call 603-237-8200.

FREQUENTLY ASKED QUESTIONS

Please note that all prices are subject to change.

***

Steel Thunder Custom Cycles

531 Bungy Road

Columbia, NH 03576

Copyright 2002-2013 Steel Thunder Custom Cycles©

 

Thank you for shopping at Steel Thunder Custom Cycles online motorcycle parts store!

 

 

 

Protected by Copyscape Duplicate Content Detection Software