Steel Thunder Custom Cycles motorcycle parts

 

Shopping Pages:

Control Section:

Brakes, discs, rotors, dashes & instrument panels, gauge brackets, footpegs, forward controls, grips, throttle control, handlebar controls, handlebars, levers, linkage, levers, mirrors, risers, shift & jockey control.

Drivetrain Section:

Belt drives, belt drive covers, clutch kits, chain drives, drivetrain packages, kick start transmission, offset sprockets, points, derby & ignition coves, primary belts, primary chains, primary covers, pulley & brake combo kit, rear drive belts, Sportster performance parts, six speed conversion, rear sprockets, rotors, transmissions & parts.

Electrical Section:

Battery related, battery tenders, charging systems,coils & mounts, dash/instrument panels, speedos, tachs, terminal kits, electronic ignitions, handlebar switches, headlights, horns, lighted license plate mounts, lighting, starter motors, taillights, turn signals, wiring harnesses.

Engine Section:

Motorcycle engine parts, drivetrain packages, cams & cam side parts, big bore kits, big bore piston kits, Sportster engine parts, motor mounts, drivetrain section, engine mounts.

Exhaust Section:

Exhaust pipes listed by model, exhaust accessories, insulating wrap, mufflers, extensions, high heat spray, heat shields, clamps and mounts.

Frame/Body Section:

Frames listed by style, engine mounts, fenders, struts, floorboards, foot rests, pegs, frame covers, hardtails, highway bars, kickstands, lowering kits, seats listed by model, shocks, sissy bars & pads, swingarms.. Also, Rolling Chassis Kits.

Front End Section:

Complete front fork assemblies, fairings & fairing accessories, fork brackets/triple trees, fork tubes, sliders, fork legs, boots, springer front ends & parts, wide glide kits.

Fuel Section (Gas, Oil, Air):

Air cleaners & covers, breathers, carburetors & rebuild kits, fuel injection control, gas tanks, gas caps, gas tank cleaner/prep systems, oil, oil coolers, oil line kits, oil pressure & tank gauges, oil pumps, oil tanks, , velocity stacks.

Saddlebag & Windshield Section:

Saddlebags listed by manufacturer, windshields

Wheel Section

Tires,  tire size chart, 40, 60 & 80 spoke wheels, solid wheels.

General Merchandise Section:

Catalogs, covers, gift certificates, gift suggestions, goggles & eyewear, hardware, luggage racks, motors, motorcycle covers, security, locks & alarms, tools, trailer accessories, ramps, wheel chocks, trailer hitches to put on motorcycle.

Other Pages:

Fun, Photos & Links Section:

Photos of our customer's motorcycles, including bike kit builds, trike build link, free biker ecards, jokes, banner links, text links, link to us, webmaster's awards.

Tech & Info Section

Tech tips, tire size chart, engine break-in, suspension & shocks info, rake and trail calculator, contact page, frequently asked questions (FAQ), our credentails, terms & conditions of sale, disclaimer, international shipping policy.

Secured by SSL - an authentic COMOCO site.

 

link

 

 

 

NEW FLAT RATE SHIPPING!  No hidden fees and NO TAX! Only $12.95 in the continental. U.S., no matter how large (or heavy) your order is!  Save $$$ ... order everything you need NOW! 

Sitemap and Search Home Page Contact Us Sportster Section Catalogs

 REAR MOTORCYCLE FENDERS
For Your American V-Twin Custom or Harley Davidson Motorcycle

Go to: Front Fenders - Go to: Sportster Fenders

Go to: Fender supports/struts

NOTE: Fenders should always be mocked-up on bike before being sent to painter.

NEW!

 

Mohawk style rear steel fender in two widths.

Mohawk

Flat top rear motorcycle fender in two widths.

Flat Top

 

REAR MOTORCYCLE FENDERS FOR CUSTOM USE - LED Sled Customs

Handmade custom rear fenders from Led Sled Customs.
These top quality fenders are made in the USA with American Made materials.

Raw Steel.
Available in two styles, in two different widths as listed.

Part #: M22054 - Mohawk Style, 7" Wide ... $174.95

Part #: M22055  - Mohawk Style, 9" Wide ... $174.95

Part #: M22056  - Flat Top Style, 7" Wide ... $174.95

Part #: M22057 Flat Top Style, 9" Wide ... $174.95

Fat Bob Rear Fender for FXST late model Harleys with 200mm tire.

FAT BOB REAR FENDER KIT FOR FXST MODELS - V-FACTOR

High quality copy of the original.
10" wide for 200 mm tires.
Includes chrome plated mounting brackets and hardware.

Part#:M29902 - Raw Steel Fender Kit, fits FXST 2006/Later models with 200 mm tire ... $203.55
Fat Bob rear motorcycle fender for wide rear tires, Big Twin and Sportster.
FAT BOB WIDE TIRE REAR FENDER FOR CUSTOM USE - V-FACTOR

Designed and manufactured for universal use.
Will accommodate either right hand or left hand drives.

Part #: M22066 - Raw Steel 8 1/2" wide, Fits Big Twin & Sportster wide tire frames ... $175.50
Fat Bob rear fender, undrilled.

FAT BOB REAR FENDER FOR CUSTOM USE - V-FACTOR

This 7" wide rear fender measures 38" in total length and is stamped from 19 guage steel.
The smooth (non-drilled) sides allow you to position the fender exactly where you want it.
Raw Steel with left hand drive fitment.

Part #: M22009 - Fits Rigid or Swingarm frame ... $82.65

Custom style rear motorcycle fender, steel, two widths.

Custom Style

 

Classic styel motorcycle fender for custom use.

Classic Style

 

Sentry style custom motorcycle fender.

Sentry Style

REAR FENDERS FOR CUSTOM USE - V-FACTOR

Smooth sides with undrilled mounts so that the exact placement can be determined by the technician.
Manufactured from .080" thick stamped steel for strength.
Phosphate etched surface to help prevent corrosion and provide an excellent surface for most primers to adhere to.
Phosphate Etched Steel. Trim for deisred look.

Part #: M22044 - Custom style, 9" width ... $174.95

Part#: M22045 - Custom style, 11" width ... $198.60

Part #: M22047 - Classic style, 9" width ... $192.95

Part#: M22049 - Classic style, 11" width ... $198.60

Part #: M22027 - Sentry style, 9" width ... $174.95

Part #: M22028 - Sentry style, 11" width ... $179.95

Original equipment replacement fender for FXWG.
OE STYLE REAR FENDER FOR FXWG - V-FACTOR

An excellent reproduction of the original equipment rear fender found on FXWG models.
This fender can also be used to customize earlier FX and FL models if used with our M22702 fender supports and 13205 taillight mount (call). Raw Steel Fender.

Part #: M22004 - Fits FXWG 1980/1986 (Replaces HD# 59904-84) ... $79.65
Original Equiptment style rear fender for FXST HD motorcycles, with wire guide.
OE STYLE REAR FENDER FOR FXST MODELS - V-FACTOR

Excellent copy of the original.
Includes flexible peel-n-stick wire guide.
Raw Steel.
Part #: M22003 - Fits FXST models 2000/2002 ( Replaces HD# 59914-00) ... $162.65

Original style Fat Boy Rear Fender with tailight mount.

M22021

Fat Boy style rear motorcycle fender without taillight mount.

M22024

OE STYLE REAR FENDERS FOR FAT BOY - V-FACTOR

7 1/4" wide feature your choice of OE style mount or smooth without taillight mount for custom application.
Wire harness clips are installed on both sides of fender.
See the electric section for taillights and the frame and body section for fender struts.

Part #: M22021- Raw Steel with taillight mount, fits FLSTF 1990/1996 as direct replacement or use for custom conversion.( Replaces HD# 59596-89) ... $99.75

Part#: M22024 - Raw Steel without taillight mount is a custom replacement for FLSTF, or use to convert your FXST to a Fat Boy look.... $99.90

1 piece rear motorcycle fender for FL.
ONE PIECE REAR FENDER FOR FL 4 SPEED - V-FACTOR

One piece rear fender without taillight provision allows custom taillight applications.
Fender strut mounting holes are provided for that perfect fit.
Raw Steel.
Fits FL 4 speed 1980/1984 and will also convert FL 4 speed 1958/1980 hinged rear fender models to later model one piece style.

Part #: M22022 - (Replaces HD# 59601-79B) ... $99.90
Original style rigid rear fender for Big Twin FL motorcycles.

OE STYLE RIGID REAR FENDER FOR BIG TWIN - V-FACTOR

Rear fender for rigid frame is complete with the brackets and seat clip mounting holes.
Rear hinged section is smooth and undrilled.
Raw Steel.
Fits FL 1949/1957.

Part #: M22018 - (Replaces HD# 59604-39) ... $158.95

Unpainted rear fender for FLST 86/99 with taillight mounting bracket and turn signal indents.

REPLACEMENT REAR FENDERS FOR BIG TWIN - V-FACTOR

Turn signal bar indents.
One piece construction.
Taillight mounting bracket.

Part #: M22007  - Unpainted Rear Fender, Fits FLST 1986/1999.
Replaces HD# 59144-87A ... $99.50

Unpainted rear fender for FLH 70/84 with turn signal bar indents and taillight mounting bracket.

REPLACEMENT REAR FENDERS FOR BIG TWIN - V-FACTOR

Turn signal bar indents.
One piece construction.
Taillight mounting bracket.

Part #: 22005 - Unpainted Rear Fender, Fits FLH 1979/1984.
Replaces HD# 59641-82A ... $99.50

Original style Rear Motorcycle Fender for fx, fxe Harley-Davidson.

OE STYLE REAR FENDER FOR FX & FXE - V-FACTOR

A super clean styled rear fender for many uses or use as stock replacement. Measures 6 1/2" wide x 40" long with taillight mount.
Raw Steel. Fits all FX, FXE 4 speed models 1973/Later (except FXWG or FXST).

Part #: M22002 - (Replaces HD# 59584-73A & 59682-7) ... $88.66

Rear Fender for Harley FXR
REAR FENDER FOR FXR - V-FACTOR

High quality replacement fender for FXR models.

Part #: M22085 - Rear Fender, Fits FXR 1981/1994.
Replaces HD# 59634-81A ... $85.40

Bobbed Rear Fender for FX Models

Bobbed Rear Fender for FX Models

Custom Style Bobbed rear fender without taillight hole so any custom after market taillight can be mounted.

#VT50-0700 - Replaces 59584-73A. Fits 1971/1985 FX models ... $109.95 including shipping*

9 inch wide steel fender for Big Twin Rigid wide tire frames.

WIDE REAR FENDERS FOR CUSTOM USE ON RIGID BIG TWIN FRAMES - V-Factor

These custom application wide rear fenders are made from 16 gauge steel to help withstand the high speed and constant vibration that some of us are known to put them through. The 9" wide fenders are stamped from one piece.

Part#:M22073  - AZZ Pounder 9" wide. Fits Big Twin rigid with chain or belt drive. ... $189.95

Rear Fender for Harley 4 speed FL
REAR FENDER FOR FL 4 SPEED - V-FACTOR

Designed without turn signal indents. Hinged two piece design with smooth tail section for use with custom taillight.
See the lighting for taillights.

Fits FL 4 speed models 1958/Later & will also fit FX 4 speed models 1971/Later if FL style fender supports are used.

Part #: M22053 - Raw Steel ... $119.50

Wide FL Style Rear fender for custom use.  Fits most Big Twin wide tire frames.

8 1/2  or 9 inches wide

WIDE FL STYLE REAR FENDERS FOR CUSTOM USE - V-Factor

These Wide Rear Fenders will help to give your wide tire bike that dresser look that is found on FLSTF (Fat Boy) and Softail Heritage models. Fenders measure 41" in total length and include internal wire routing tubes on each side of the fender. Drill to mount as necessary. Raw Steel. Fits most Big Twin wide tire frames.

Part#:M22091 - 8 1/2" wide rear fender. Fender is manufactured using the center split and weld method. ... $209.30

Part#:M22092 - 9" wide rear fender. Made from a single piece stamping. ... $196.80

Fat Bob Wide Rear Fender  for custom use.

Save!

WIDE FAT BOB FENDER KITS FOR WIDE TIRE APPLICATIONS

This Wide Fat Bob Fender Kit has it All! Included in this kit is: a Wide Universal Raw Steel Fender that will accept right or left hand drive, chain or belt drive, a Chrome Plated Adjustable License Plate Mounting Kit and Taillamp Assembly all in one shot. The Smooth Fender is ready for preparation and paint. As always, we suggest mounting the Fender, License Plate Kit, and Taillamp assembly for proper fit in the frame before painting. A real $avings!

Part#: M29925 - 8 1/2" Wide Fender Kit ... $208.25

Kraft Tech Flat Rear Fenders for Rigid Frame Big Twin and Sportster, several widths avaiilable.
FLAT REAR FENDER FOR RIGID FRAMES - Kraft Tech

Designed with strength in mind, these one piece HARDBODY rear fenders are cold rolled from 14 gauge steel. They measure a full 48" in circumference and can be cut to your desired length. Fenders are not drilled or relieved for the chain or drive belt. See the frame and body section for fender supports. Fits Big Twin & Sportster Rigid frames.

Part #: M22013 - Raw Steel 6" wide flat fender ...$52.85

Part #: M22029 - Raw Steel 7 1/2" wide flat fender ... $61.35

Part #: M22030 - Raw Steel 8 1/2" wide flat fender ... $61.33

Part #: M22031 - Raw Steel 9" wide flat fender ... $61.33

Bobbed Flat Rear Fender for Rigid Frame Big Twin and Sportster motorcycles.

Custom Bobber Style

BOBBED FLAT REAR FENDER FOR RIGID FRAMES - V-FACTOR

Manufactured form 16 gauge rolled steel.
Features a bobbed tail with a rolled edge.
Fender measures 41" in circumference.

Fits Big Twin & Sportster Rigid frame with chain or belt rear drive.

Part #: M22016 - Raw Steel 6" wide fender ...$45.95

Replacement Rear Fender for Sportster, also comes undrilled for custom bobber applications.

Image not accurate, this bobber fender is UNDRILLED.

For drilled versions and other Sportster Fenders go HERE.

REAR FENDERS FOR SPORTSTER & CUSTOM USE- V-FACTOR

High quality replacement rear fender, undrilled for custom use.

Part #: M22084 Undrilled Bobbed Rear Fender, Fits Sportster 1982/2003 & for custom use ... $64.95

More Sportster Fenders

Saddlebag filler panel shown installed at fender.

Fender Filler Panel for Saddlebag gap, chrome plated, fit FLHX

FENDER/SADDLEBAG FILLER PANEL PAIRS FOR BIG TWIN -
V-FACTOR


Mounts between the rear fender and saddlebag assembly and covers the rear shock mount.
Manufactured from heavy duty 16 gauge steel.
Chrome Plated.

Part #: M26310 - Chrome Plated Pair
Fits FLHX models 2006/Later

Suggested Retail $149.65

Chrome filler panel for fender, saddlebag on touring model motorcycles.

Motorcycle fender-saddlebag filler panels, black primer for painting.

FENDER/SADDLEBAG FILLER PANEL PAIRS FOR BIG TWIN - V-FACTOR

Mounts between the rear fender and saddlebag assembly and covers the rear shock mount.
Manufactured from heavy duty 16 gauge steel.

Fits HD Touring models 1993/2008 (except FLHX) with rear docking kit, FLHRS or models equipped with nostalgic and triple rail saddlebag guard rails or chrome saddlebag guard kit, Electra Glide light rails, leather saddlebags or FLTR 1998/Later
See below for availability of finishes (chrome, or black primer for painting):

Part #: M26312 - Chrome Plated Panel Pair, Replaces HD# 45898-98 ... $84.55

Part #: M26313 - Black Primer Panel Pair, Replaces HD# 45898-10BEO ... $71.55 including shipping*

Fender - saddlebag filler panels for Big Twin Harley-Davidson motorcycles.  Chrome plated or Primer Black.

Choose from Chrome or Primer Black

FENDER/SADDLEBAG FILLER PANEL PAIRS FOR BIG TWIN - V-FACTOR

Mounts between the rear fender and saddlebag assembly and covers the rear shock mount. Manufactured from heavy duty 16 gauge steel.
See below for availability of finishes :

Part #: M26314 - Chrome Plated Panel Pair, Fits FLHT & FLHR 2009/Later. Replaces HD# 91422-09 ... $112.95

Part #: M26315 - Black Primer (for painting) Panel Pair, Fits FLHT & FLHR 2009/Later. Replaces HD# 91614-10 ... $89.95

Don't see what you need?  Contact us.  Chances are we have it.  We have thousands of parts that are not shown online.

15 Percent Coupon, summer promo, Beer Machine

FLAT RATE SHIPPING APPLIES IN CONTINTENTAL 48 UNITED STATES ONLY. AK, HI and APO/FPO will have additional shipping fees. We ship mainly within the U.S.A. and to APO/FPO (military addresses; weight and size restrictions apply.). We also ship to Australia. We do not accept foreign credit cards. Please see our CONTACT page for more information.

Prefer to call in your order to Steel Thunder? Call 603-237-8200.

FREQUENTLY ASKED QUESTIONS

Please note that all prices are subject to change.

***

Steel Thunder Custom Cycles

531 Bungy Road

Columbia, NH 03576

Copyright 2002-2013 Steel Thunder Custom Cycles©

 

Thank you for shopping at Steel Thunder Custom Cycles online motorcycle parts store!

 

 

 

Protected by Copyscape Duplicate Content Detection Software