SMOOTH FRONT FENDER FOR HERITAGE SOFTAIL - V-FACTOR

High quality replacement for Heritage Softail models.
Smooth with no trim holes for a custom look.

Part#:M22403 - Raw Steel Front Fender; Fits FLST & FLSTN 1986/Later ... $107.97 including shipping*

OE STYLE FRONT FENDER FOR FAT BOY - V-Factor

Raw Steel.
Great reproduction of the OEM fender.
Works on the FLST & FLSTC models 1986/Later when converting to the Fat Boy look.
Made from 18-gauge steel.
(Replaces HD# 59139-89)

Part#: M22434 - Fits FLSTF 1990/Later ... $95.89 including shipping*

FRONT FENDERS FOR CUSTOM USE - V-FACTOR

Designed with the custom builders in mind, these front fenders feature smooth sides with undrilled mounts so that the exact placement can be determined by the technician.
For strength these fenders are manufactured from .080" thick stamped steel and include a phosphate etched surface to help prevent corrosion and provide an excellent surface for most primers to adhere to. Comes in two lengths:

Part #: M22448 - Phosphate Etched Steel, Cafe style, 4 3/4" width for Narrow Glide front end and 19" or 21" wheel (also fits Wide Glide if used with spacers). Total length of fender is 28.5" ... $112.20 including shipping*

Part#: M22449 - Phosphate Etched Steel, Cafe style, 6 1/4" width for Wide Glide front end and 16" wheel.  Total length of fender is 32"... $112.78 including shipping*

OE STYLE FRONT FENDER FOR FL, FLT & FLHT - V-FACTOR

This classic replica of the old FL front fender is made right and looks as it should. Features rolled edges to beef up strength.
Not drilled for fender trim.
Raw Steel Fender.

Part #: M22418  - Fits FL 4 speed 1949/1984 and FLT, FLHT not using lighted fender tip ( Replaces HD# 59000-58G) ... $107.97 incluidng shipping*

Springer Front Fender

Replaces 59176-96. Fits FXSTS Springer Softail models 1998 to Present. Replacement fender for FXSTS Springer Softails, comes with raw finish with redesigned bracket for looks and strength. Part #KW11307 ... $66.89 including shipping*

Narrow Front Fender for FX/FXR/XL

Replaces 59031-83. Fits FX, FXR and XL models 1973 to 2003 with either 35 or 39mm fork tubes. Custom narrow front fender with raw finish. For use with 18", 19" or 21" rims. Also fits Mid-USA Springers. Part #KW11300 ... $49.95 including shipping*

OE STYLE FRONT FENDER FOR BIG TWIN SPRINGER - V-FACTOR

Quality reproduction of the original unit.
Designed to be used without fender trim.
If fender trim is desired, it must be drilled.
Raw Steel Fender. Fits Big Twin Springer models 1937/1948.

Part #: M22413 - (Replaces HD# 59012-40) ... $228.39 incluiding shipping*

Composite

PYO Classic Stretched Front Fender for 23" wheels - Paul Yaffe Originals

Adding a 23-inch front wheel to your Bagger is all the rage! Paul loves the way a 23 looks on a bagger so much that he’s created a line of products just for this conversion. This super high quality high pressure formed composite fender is styled in a classic Bagger fashion with a nice 4” stretch on the tail for that slammed hot rod look. Check out the perfect 90 degree angle between the top and rear fender edges…Perfect symmetry will set your bike apart from the pack and allow the eye to flow seamlessly across your custom. Each fender is 3-D molded and hand finished so there’s no need for additional mounting blocks. We’ve handled all that; just pull it out of the box and bolt it on!

Part #: C603066 - PYO "Classic" Front Fender ... $439.99 including free shipping*

Composite

Optional Spacers:

PYO Thicky Stretched Front Fender for 23" Wheels - Paul Yaffe Originals

This classic west coast styled front fender has been a best seller for years. Now Paul has completely restyled this classic fender to totally compliment 23” wheel conversions. He lengthened both front and rear, squared the ends and thickened the sidewalls. This super high quality hihg-pressure formed composite fender offers a contemporary Pro-Street styel with a full wrap tire hugging profile. Each fender is shipped raw and not drilled so you can slam it as close to your tire as you dare.
Additional fender spacing is required. This fender requires the use of our Fender Spacers described below (sold as option with purchase).

Fender Spacers:  These trick little spacer blocks make the install of our new fenders simple and easy. They feature Domino styling on one side and smooth styling on the other so you can choose your styling preference. Available in black powder coat with accent cuts or satin finishes.
Part#: C603067 - PYO "Thicky" Stretched Front Fender for 23" Wheels ... $431.99 including free shipping*  With fender spacers ... $508.98 including free shipping*

Options:

Thicky Fender Only $431.99 Fender and Black Spacer w/accent cuts 603026 $508.98 Fender with Satin Spacer $508.98

DAGGER FRONT FENDERS FOR CUSTOM USE - Sumax

• Fiberglass.
• Composite Fenders are made from a combination of low profile ortho resins and cross woven glass fabrics.
• Will not splinter like the old style fiberglass when you drill the fender mounts.
• Feature a sandable grey primer gel coat that is ready to scuff and paint.
• 7" Wide for Wide Glide. Tire Size 90/90 21", Length 36".
• Includes installation instructions
• Prices include shipping*

Part#: M22441 ... $164.99 including shipping*

Rear Fenders

Sportster Fenders

TIRE SIZE CHART