Steel Thunder Custom Cycles motorcycle parts

 

Shopping Pages:

Control Section:

Brakes, discs, rotors, dashes & instrument panels, gauge brackets, footpegs, forward controls, grips, throttle control, handlebar controls, handlebars, levers, linkage, levers, mirrors, risers, shift & jockey control.

Drivetrain Section:

Belt drives, belt drive covers, clutch kits, chain drives, drivetrain packages, kick start transmission, offset sprockets, points, derby & ignition coves, primary belts, primary chains, primary covers, pulley & brake combo kit, rear drive belts, Sportster performance parts, six speed conversion, rear sprockets, rotors, transmissions & parts.

Electrical Section:

Battery related, battery tenders, charging systems,coils & mounts, dash/instrument panels, speedos, tachs, terminal kits, electronic ignitions, handlebar switches, headlights, horns, lighted license plate mounts, lighting, starter motors, taillights, turn signals, wiring harnesses.

Engine Section:

Motorcycle engine parts, drivetrain packages, cams & cam side parts, big bore kits, big bore piston kits, Sportster engine parts, motor mounts, drivetrain section, engine mounts.

Exhaust Section:

Exhaust pipes listed by model, exhaust accessories, insulating wrap, mufflers, extensions, high heat spray, heat shields, clamps and mounts.

Frame/Body Section:

Frames listed by style, engine mounts, fenders, struts, floorboards, foot rests, pegs, frame covers, hardtails, highway bars, kickstands, lowering kits, seats listed by model, shocks, sissy bars & pads, swingarms.. Also, Rolling Chassis Kits.

Front End Section:

Complete front fork assemblies, fairings & fairing accessories, fork brackets/triple trees, fork tubes, sliders, fork legs, boots, springer front ends & parts, wide glide kits.

Fuel Section (Gas, Oil, Air):

Air cleaners & covers, breathers, carburetors & rebuild kits, fuel injection control, gas tanks, gas caps, gas tank cleaner/prep systems, oil, oil coolers, oil line kits, oil pressure & tank gauges, oil pumps, oil tanks, , velocity stacks.

Saddlebag & Windshield Section:

Saddlebags listed by manufacturer, windshields

Wheel Section

Tires,  tire size chart, 40, 60 & 80 spoke wheels, solid wheels.

General Merchandise Section:

Catalogs, covers, gift certificates, gift suggestions, goggles & eyewear, hardware, luggage racks, motors, motorcycle covers, security, locks & alarms, tools, trailer accessories, ramps, wheel chocks, trailer hitches to put on motorcycle.

Other Pages:

Fun, Photos & Links Section:

Photos of our customer's motorcycles, including bike kit builds, trike build link, free biker ecards, jokes, banner links, text links, link to us, webmaster's awards.

Tech & Info Section

Tech tips, tire size chart, engine break-in, suspension & shocks info, rake and trail calculator, contact page, frequently asked questions (FAQ), our credentails, terms & conditions of sale, disclaimer, international shipping policy.

Secured by SSL - an authentic COMOCO site.

 

link

 

 

 

NEW FLAT RATE SHIPPING!  No hidden fees and NO TAX! Only $12.95 in the continental. U.S., no matter how large (or heavy) your order is!  Save $$$ ... order everything you need NOW! 

Sitemap and Search Home Page Contact Us Sportster Section Catalogs

Exhaust Pipes for Shovelhead

Clamps,straps and brackets can be found HERE

Fuel Injection Modules

Independent dual corssover head pipe exhaust for shovelhead 66/69, Power House by Kraft Tech.

INDEPENDENT DUAL CROSSOVER HEAD PIPE EXHAUST SET FOR SHOVELHEAD 1966/1969 - Power House by Kraft Tech

This 1 3/4" O.D. Independent Dual Crossover Exhaust Set fits Shovelhead models 1966/1969 and is a reproduction of the original equipment manufacturer's set. Mounts like stock set, and crossover clamp is included with each set. Fits Kick or Electric Start with swingarm frame. Made in U.S.A. Part#:90416 ... $393.57

2 into 1 header pipe exhaust set for  generator Shovelhead.

2 INTO 1 HEADER PIPE EXHAUST SET FOR SHOVELHEAD 1966/1969 - Paughco

This 1 3/4" O.D. 2 into 1 Header Pipe Exhaust Set is reproduction of the original equipment manufacturer's system. Mounts like stock set. Fits generator Shovelhead engine in rigid or swingarm frame. Made in U.S.A. Part#:90314 ... $174.69

S type dual exhaust for Shovelhead

 

 

"S" TYPE DUAL EXHAUST SYSTEMS FOR SHOVELHEAD 1966/1969 - Cycle Shack

These 1 3/4" O.D. Dual Exhaust Systems feature "S" type front pipe and over the transmission rear pipe for extra clearance and safer right hand turns. Fits generator Shovelhead 1966/1969 in swingarm frame. Hidden channel mounting. Universal strap bracket included. Made in U.S.A.

Part#:92070 - Slash Cut. Use with wrap around oil tank. Oil lines may require re-routing. Includes hidden channel mounts without T bolts. ... $268.73

Slash Cut drag pipe exhaust for shovelhead 70/L from Cycle Shack.

Slash Cut

Straight Cut drag pipe exhaust for shovelhead 70/L from Cycle Shack.

Straight Cut

DRAG PIPE EXHAUST SETS FOR SHOVELHEAD 1970/LATER - Cycle Shack

This 1 3/4" O.D. 40" long drag pipe exhaust set features over the transmission rear pipe for extra ground clearance and safer right hand turns. Fits alternator Shovelhead engine in swingarm frame, kick or electric start. Sheet metal relay cover must be removed and will not clear highway bars or saddlebags. Hidden channel mounting. Made in U.S.A.

Slash Cut - Part#:M90060 ... $187.00

Straight Cut - Part#:M90159 ...$187.00

Use 95118 T-Bolts, 95026 hanger bracket, exhaust port gaskets and exhaust flange bolts.

Upswept Head Pipe Exhaust for Shovelhead 70/L.  Paughco.

UPSWEEP HEAD PIPE EXHAUST SET FOR SHOVELHEAD 1970/LATER - Paughco

This nostalgic appearing 1 3/4" O.D. Upsweep Head Pipe Exhaust Set fits alternator Shovelhead engine in swingarm frame. Will clear FXE type battery boxes. Mount brackets included. Made in U.S.A. Part#:M90317 ... $290.28

Tapered dual exhaust for FX and FXWG Shovelhead.

Tapered

 

Slash Cut dual exhaust for FX and FXWG Shovelhead.

Slash Cut - 1 3/4 or 2" O.D.

Turnout dual exhaust for FX and FXWG Shovelhead.

Turnout

DUAL EXHAUST SYSTEMS FOR FX AND FXWG SHOVELHEAD - Cycle Shack

High quality and superior sound is what these sets offer. Manufactured with hidden channel mounting with T-bolts and mount bracket with hardware. These Dual Exhaust Systems fit 4 speed FX models 1971/1984 and FXWG 1980/1982, kick or electric start. Use late style kick arm or our MU71016 kick start shaft. Mount bracket included. Made in U.S.A.

1 3/4" O.D.-Tapered - Part#:M92011 ... $229.82

1 3/4" O.D.-Slash Cut - Part#:M91130 ... $229.82

2" O.D.-Slash Cut - Part#:M91113 ... $252.81

1 3/4" O.D.-Turnout - Part#:M92047 ... $256.63

2 into 1 collector turnout exhaust system for FX Shovelhead from Cycle Shack.

2 INTO 1 COLLECTOR TURNOUT EXHAUST SYSTEM FOR FX SHOVELHEAD MODELS - Cycle Shack

Step up from the stock look with this Chrome Plated 2 into 1 Collector Turnout Exhaust System. The 1 3/4" header pipes flow into a 3" O.D. upswept collector that houses a high performance baffle for increased power and great sound. Mounting Bracket and Heat Shields are included. Fits FX, FXE 1971/1984 & FXWG 1981/1982. Made in U.S.A. Part#:M92109 ... $398.36

40 inch long straight cut drag pipes for FX, FXWG Shovelhead.  Cycle Shack.

Straight Cut Drag Pipes

DRAG PIPE EXHAUST SETS FOR FX, FXWG SHOVELHEAD - Cycle Shack These 40" long drag pipe exhaust sets fit alternator Shovelhead engine in FX, FXE, swingarm frame 1971/1984 and FXWG 1980/1982 with kick or electric start. Available in classic slash cut style or with straight cut ends. Hidden channel mounting. Made in U.S.A.
1 3/4"-Straight Cut Drag Pipe Exhaust Set. Part#:M90157 ... $187.00

Dual tapered exhaust for shovelhead 70/Later.

DUAL EXHAUST SYSTEMS FOR SHOVELHEAD 1970/LATER - Cycle Shack

This 1 3/4" O.D. Dual Tapered Muffler Exhaust Set features over the transmission rear pipe and inside the frame front pipe that clears OEM footboards for great ground clearance. Sheet metal relay cover must be removed. Will not fit with OEM highway bars or saddlebags. Use with late OEM style kick arm. Hanger bracket included. Hidden channel mounting. Made in U.S.A. Part#:M92085 ... $229.82

Cycle Shack Drag Pipes for FLH Shovelhead in swingarm frame.

DRAG PIPE SET FOR FLH SHOVELHEAD - Cycle Shack

This chrome plated 36" long 1 3/4" O.D. slash cut Drag Pipe Set features hidden channel mounting without T bolts for a clean, custom look. This set will clear OE highway bars. To retain footboards, use M95001 exhaust mount bracket (sold optional below). Fits FLH 4 speed Shovelhead in swingarm frame, kick or electric start, 1970/1984.
Part#:M90003 - Drag Pipe set for FLH Shovelhead ... $182.60


Use 95118 T Bolts, 95029 hanger bracket, exhaust port gaskets and exhaust flange bolts.

To retain footboards, use M95001 exhaust mount bracket:

Part #:M95001 - Floorboard Bracket - Use to replace right factory footboard mount if you want to retain footboards on an FLH when using Cycle Shack and Run Roader exhaust systems. Fits FLH models 1970/1984. Sold each ... $9.90

(Please Note: Our minimum order is $35.00 total. Order with exhaust pipes, or take advantage of our low Flat Rate Shipping and order everything you need now!)

Long Goose style exhaust pipes for FLH Shovelhead.

DRAG PIPE LONG GOOSE STYLE EXHAUST SETS FOR FLH SHOVELHEAD 1970/LATER - Paughco

These chrome plated 34" Drag Pipe Exhaust sets feature inside the frame front pipe and under the transmission rear pipe. Fits FLH Shovelhead engine in swingarm frame, kick or electric start. To retain footboards, use floorboard bracket M95410 optional below.
1 3/4" O.D.Long Goose Style Drag Pipe Exhaust Set Chrome plated. Fits FLH 4 speed Shovelhead in swingarm frame, 1970/Later.

Part#: M90101 - Long Goose Style Drag Pipes for FLH Shovelhead 70/Later ... $193.49

Part#: M95410  - Footboard Bracket - Use this bracket to replace right side footboard mount to retain footboards on FLH when using Paughco exhaust system.  Sold each ... $31.35

(Please Note: Our minimum order is $35.00 total. Order with exhaust pipes, or take advantage of our low Flat Rate Shipping and order everything you need now!)

Drag Pipes for FLH Shovelhead from Paughco.  40 inch long slash cut.

DRAG PIPE SET FOR FLH SHOVELHEAD - Paughco

This 40" long slash cut Drag Pipe Set features an inside the frame front pipe and an under the transmission rear pipe. To retain footboards, use footboard bracket M95410 (sold optional below). This set fits swingarm frame with kick or electric start. Made in U.S.A.

Part#:M90102 ... $174.69

Part#: M95410  - Footboard Bracket - Use this bracket to replace right side footboard mount to retain footboards on FLH when using Paughco exhaust system.  Sold each ... $31.35

(Please Note: Our minimum order is $35.00 total. Order with exhaust pipes, or take advantage of our low Flat Rate Shipping and order everything you need now!)

Slash Cut Dual Exhaust.

Slash Cut Dual Exhaust

Hanger bracket included

 

 

DUAL EXHAUST SYSTEMS FOR SHOVELHEAD 1970/LATER - Paughco

This 1 3/4" O.D. Slash Cut Dual Exhaust System fits alternator Shovelhead FLH electric start only. Front pipe clears OEM footboards and forward mounted master cylinder. Rear pipe clears large FLH battery. Will not clear OEM highway bars. Hanger bracket included. Hidden channel mounting. Made in U.S.A.

Part#:M92042 ... $229.82

37 inch long slash cut drag pipes for FXR & FXRS Shovelhead.

SLASH CUT DRAG PIPE EXHAUST SET FOR FXR AND FXRS SHOVELHEAD - Cycle Shack

This 1 3/4" O.D. 37" Long Slash Cut Drag Pipe Exhaust Set fits FXR and FXRS Shovelhead models 1982/1983. Must use OEM muffler bracket and clamps. Made in U.S.A. Part#:M90005 ... $187.00

True Independent Dual Crossover

Head Pipe Set for FLT Shovelhead motorcycles from Paughco.

HEAD PIPE SET FOR FLT SHOVELHEAD - Paughco

This chrome plated Paughco 1 3/4" O.D. Header Pipe Set provides you with true dual exhaust performance and a look second to none. On the 1981 to 1983 models this set eliminates the inter connecting Y pipe that the OEM exhaust has. This provides you with a true independent dual crossover exhaust. Includes a left mount bracket that connects the left head pipe to the cylinder base. Fits FLT Shovelhead 1980/1983. Made in U.S.A. Part#:M90410 ... $414.00

Helpful Hint :Drag pipes have no mufflers and are designed for use in closed course or show competition only. They will exceed any noise standard anywhere and as such are illegal for on-highway use

All pipes on this page are Chrome PlatedSlip-on Mufflers are here.   Clamps, brackets, etc. are here.

SEE EXHAUST SECTION FOR OTHER APPLICATIONS.

FOR CUSTOM EXHAUST SECTIONS ('BUILD YOUR OWN'), INSULATING WRAP, HI-HEAT SPRAY, UNIVERSAL HEAT SHEILDS, ETC. GO TO EXHAUST ACCESSORIES.

If you need hardware for these pipes, give us a call to order everything at once. This will save you extra shipping charges. Thanks!

SAMSON BIG TWIN PIPES ARE HERE.

Also see: Fuel Injection Modules

Also see: Electronic Performance - tunable modules, etc.

Don't see what you need?  Contact us.  Chances are we have it.  We have thousands of parts that are not shown online.

15 Percent Coupon, summer promo, Beer Machine

FLAT RATE SHIPPING APPLIES IN CONTINTENTAL 48 UNITED STATES ONLY. AK, HI and APO/FPO will have additional shipping fees. We ship mainly within the U.S.A. and to APO/FPO (military addresses; weight and size restrictions apply.). We also ship to Australia. We do not accept foreign credit cards. Please see our CONTACT page for more information.

Prefer to call in your order to Steel Thunder? Call 603-237-8200.

FREQUENTLY ASKED QUESTIONS

Please note that all prices are subject to change.

***

Steel Thunder Custom Cycles

531 Bungy Road

Columbia, NH 03576

Copyright 2002-2013 Steel Thunder Custom Cycles©

 

Thank you for shopping at Steel Thunder Custom Cycles online motorcycle parts store!

 

 

 

Protected by Copyscape Duplicate Content Detection Software