Specialty pages:

Sportster Section

Buell parts

V-Rod parts

Double Back Header System - Klock Werks

• Right off of Brian Klock's "WFB" Discovery bike.
• Chrome-plated 1-3/4" front and rear header pipes with 2-1/4", 220° wrap heat shields.
• Accepts 95/08 stock or aftermarket slip-on FL mufflers;  check air cleaner clearance before installation.
• Includes Oxygen sensor ports.
• Made in the U.S.A.

Part #061800-0531 - For 07/08 FLHT, FLHX, FLHR, FLTR models ... $476.96 including free shipping*

Part #061800-0532 - For 95/06 FLT, FLHT, FLHX, FLHR, FLTR models ... $472.46 including free shipping*

CLASSIC DRAG PIPE EXHAUST SET FOR FXR EVOLUTION - Cycle Shack


These 40" Long Drag Pipe Exhaust Sets fit all FXR Evolution models 1984/Later. Hidden channel mounting. Designed to be used with OEM brackets and clamps. Both sets of pipes include T-bolts for mounting. The 2" O.D. set also includes mounting clamps and bracket. Made in U.S.A.

1 3/4" O.D. - Part#:MU90021 ... $174.98 including shipping*

Use Flat Straps, Exhaust Port Gaskets, Exhaust Pipe Clamps and Retaining Rings located on the Exhaust Hardware pages of 'Just Hard Parts' Catalog.

2 INTO 1 TURNOUT EXHAUST SYSTEM FOR FXR MODELS- Cycle Shack


Add flash and resonance to your FXR with this chrome plated 2 into 1 Collector Turnout Exhaust System. The 1 3/4" header pipes flow smoothly around the timing cover into a 3" O.D. turnout collector that houses a low restriction, all steel baffle. Looks great, sounds great! Heat shields included. Fits FXR Models 1984/Later. Made in U.S.A.
Part#:MU92110 ... $415.80 including free shipping*

CLASSIC DRAG PIPE EXHAUST SET FOR FLT EVOLUTION - Cycle Shack

This 1 3/4" O.D. 40" long Drag Pipe Exhaust Set will give you the traditional Harley look and sound. Fits FLT Evolution models 1985/Later. Mounting hardware for front and rear pipe included with each set. Made in U.S.A.

Part#:MU90113 ... $251.89 including shipping*

CHROME PLATED INDEPENDENT DUAL CROSSOVER HEADER PIPE SET FOR FLT -Samson

Designed to eliminate the crossover pipe found on the OE style header pipes to produce a true Independent Dual Exhaust that creates a sound unlike any interconnected exhaust.
Clean look with simplified removal and installation.
Includes heat shields, mounting hardware and instructions. Made in U.S.A.

1 3/4" O.D.
Fits FLT, FLHT & FLHR 1995/Later
Also fits Late 1985/1994 if used with 1995/Later mufflers - Part#:MU90419 ... $413.95 including free shipping*

3 step headers for maximum performance! Independent dual crossover exhaust system from Caliber.

Left side shown installed.

CHROME PLATED THREE STEP HEADER EXHAUST SYSTEM FOR FLT - Caliber

Independent Dual Crossover.
Three Stepped Header design for improved horsepower and torque.
The first section coming out of the heads measure 1 3/4" O.D., the second section is 1 7/8" O.D. and the third section measures 2" O.D.
The mufflers measure 3" O.D. and include aluminum end caps.
1 3/4" and 2" baffles are included for fine tuning.
Includes heat shields, mounting hardware and instructions. Made in U.S.A.

Fits FLT, FLHT, FLR & FLHS Late 1985/Later - Part#:MU90420 ... $895.50 including free shipping*

Tapered

DUAL EXHAUST SYSTEMS FOR FLT MODELS - Cycle Shack

Designed to clear OE highway bars, saddlebags and passenger footboards.
The 1 3/4" O.D. sets do not include heat shields, but can be used with the OEM heat shields. These sets are not designed for use with aftermarket 6 speed transmissions. Muffler O.D. measures 2 1/2".
The 2" O.D. sets include heat shields and are clearanced for the extra width of 6 speed transmissions. Muffler O.D. measures 2 3/4".
Mounting hardware and installation instructions are included. Made in U.S.A.

Tapered, 1 3/4" O.D. Fits FLT, FLTR, FLHR & FLHT Late 1985/Later. Part#:MU91401... $322.25 including free shipping*

"SILVER BULLET" SLIP ON MUFFLERS FOR FLT DRESSER MODELS 1995/LATER - Samson

If you are looking to improve your power output and enhance your exhaust's sound, then a pair of these slip-on mufflers from Samson is a logical choice. To create the correct back pressure for the engine while maintaining a high exhaust flow rate, these mufflers feature an all steel, welded in power chamber/baffle system. This power chamber (shown below) collects the exhaust gases and then funnels them into the spiral louvered baffle. Unlike baffles with replaceable packing, the power chamber will never require replacement and will maintain the same exhaust note for years to come. The Silver Bullet mufflers have a tapered tail end and measure 29" in length, are 3" O.D. and include rear mounting hardware. Sold in pairs. Fits all Dresser models including FLHR 1995/Later.

Part#: MU97091 - Silver Bullet. Tapered. ... $413.95 including FREE SHIPPING*

SEE EXHAUST SECTION FOR OTHER APPLICATIONS.

FOR CUSTOM EXHAUST SECTIONS ('BUILD YOUR OWN'), INSULATING WRAP, HI-HEAT SPRAY, UNIVERSAL HEAT SHEILDS, ETC. GO TO EXHAUST ACCESSORIES.

If you need hardware for these pipes, give us a call to order everything at once. This will save you extra shipping charges. Thanks!