Specialty pages:

Sportster Section

Buell parts

V-Rod parts

COBRA

Dragsters Exhaust for 2006/2007 Dyna

• Perfect update to traditional drag pipes; maintains clean, pure drag-pipe appearance.
• Full-length, 2.5" heat shields with a 222° wraparound for non-blueing appearance.
• Capped with machined and chromed billet tips.
• Removable performance cores.
• Feature power with social responsibility.
• Simple installation.
• Made in the U.S.A.

Part #: DS1800-0197 - Dragsters Exhaust for 06/07 Dyna models ... $431.96 including shipping*

PLEASE NOTE: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items.

SPEEDSTER EXHAUSTS (WITH POWERPORT) for Dyna

PowerPort crossover makes for a significant power increase from just off idle to redline.
PowerPort increases power and overall performance similar to what you might expect from a 2-into-1 system.
Large 2.5”, 222°, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing.
Show-chrome finish with beautifully machined chrome billet end caps for a truly custom finish.
Easy installation.
Available for Dyna in short, long and slash-down styles.
Includes mounting hardware and removable baffles.
Made in the U.S.A.
Power with social responsibility.

SHORTS

Part #: DS1800-0026 - Cobra Speedster Shorts exhaust for all 91-05 Dyna models ... $517.46 including shipping*

LONGS

Part #: DS1800-0028 - Cobra Speedster Longs exhaust for all 91-05 Dyna models ... $449.96 including shipping*

SLASH-DOWN

Part #: DS1800-0088 - Cobra Speedster Slash-Downs exhaust for all 91-05 Dyna models ... $530.96 including shipping*

Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning characteristics, cam timing, carburetor jetting, overheating, etc. and is not caused by defective manufacturing. See hardware, chemicals and tools for products that will help to prevent or remove blueing.

PLEASE NOTE: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items.

NEW! 

Samson Big Guns 3

Street Sweepers

Baloney

BIG GUNS 3 STREET SWEEPERS & BALONEY EXHAUST PIPE SETS FOR DYNA - Samson

Chrome Plated.
Designed as conventional muffled exhaust with the massive look of 2 1/2" O.D. drag pipes.
To create the correct back pressure for the engine while maintaining a high exhaust flow rate, the mufflers feature an all steel welded-in power chamber/baffle system. This power chamber (see additional images) collects the exhaust gases and then funnels them into the spiral louvered baffle. Unlike baffles with replaceable packing, the power chamber will never require replacement and will maintain the same deep throaty exhaust not for years to come.
Heat shields are permanently attached which eliminates broken tab brackets.
Includes installation instructions.

Part#: MU90212 - Fits Dyna models 1991/2005 ... $476.95 including free shipping*

Part#: MU90219 - Fits Dyna models 2006/2007 ... $476.95 including free shipping*

Part#: BC650451 - Fits Dyna models 2006/2007... $476.96 including shipping*

Parts Necessary to Complete Installation: Use exhaust port gaskets, exhaust pipe clamps and retaining rings & exhaust stud nuts located in Exhaust Section of the Mid-USA catalog.  Call to place order with extra parts toll free: 1-866-889-7828 9-5 CST, M-F.  Parts ship free with exhaust.

"POWER HOUSE" DRAG PIPE EXHAUST SET FOR DYNA MODELS

This 1 3/4" O.D. long drag pipe exhaust set from POWER HOUSE features under transmission rear pipe and slash cut ends that stop at the rear axle. They have hidden channels, and T bolts are included. Made in U.S.A. Fits Dyna models 1991/2005. Part#:MU91104 ... $147.94 including shipping*.

SLASH CUT DRAG PIPE EXHAUST SETS FOR DYNA MODELS - Cycle Shack


These 40" long Classic Slash Cut drag pipe exhaust set fit all Dyna models 1991/2005. Must use OEM muffler support and brackets. Hidden channel mounting. T Bolts included. Made in U.S.A. Choice of 1-3/4" O.D. or 2" O.D.

Part#:MU90119 - 1 3/4" O.D. ... $174.98 including shipping*

Parts Necessary to Complete Installation: Use OEM exhaust mount bracket on 1995/Later models. Use MU95414 exhaust mount bracket on 1991/1994 models (sold lower on page). Also use exhaust port gaskets, exhaust pipe clamps and retaining rings located on the Exhaust Hardware pages of our "Just Hard Parts" catalog.

UPSWEEP DRAG PIPE SET FOR DYNA MODELS - Power House by Kraft Tech

" POWER HOUSE" These chrome plated 2" O.D. Drag Pipes feature an over the transmission rear pipe and upsweep tail sections. Available with slash cut ends. The front pipe is 65" long, the rear pipe is 42" long. Both feature hidden channel mounting and include T bolts. Made in U.S.A. Fits Dyna 1991/2005.

Part#:MU90015 ... $170.71 including shipping*

DRAGSTERS - Cobra

Perfect update to traditional drag pipes; maintains clean, pure drag-pipe appearance.
Full-length, 2.5” heat shields with a 222° wraparound for a non-blueing appearance.
Capped with machined and chromed billet tips.
Removable performance cores.
Feature power with social responsibility.
Simple installation
Made in the U.S.A.

Part #: DS1800-0198 - For all 91-05 Dyna models ..$431.96 including shipping*

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items.

PYTHON® STAGGERED DUALS EXHAUST SYSTEMS

Developed and tested to increase performance throughout the entire rpm range.
Headpipes are 1 3/4” and flow into 2 1/4” muffler bodies.
Hidden crossover system improves scavenging for more horsepower and better sound.
Come complete with full-coverage, full-length heat shields for a virtually blue-proof appearance.
With heat shields installed, pipes have a burly 2 1/2” look.
Feature an embossed Python logo on rear pipe and removable baffles.
All required mounting hardware and instructions are included.

Part #: DS1800-0241- For 06 Dyna models ... $481.46 including shipping*

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items.

RINEHART 2-INTO-1 EXHAUST SYSTEMS BY BUB

New 2-into-1 systems use high-flow, mitered-cut 1 7/8” headers with a machined inlet for added exhaust velocity and improved anti-reversion qualities.
Fat, full-coverage 2 1/4” heat shields prevent blueing; an additional heat shield gives the header-muffler union a smooth, sleek look.
86-06 Softail, 06 Dyna and 99-06 FL models feature dual oxygen sensor ports, as noted.
4 1/2” megaphone-style muffler has a rich, deep tone.
Black-anodized billet aluminum end cap uses Multi-Angled Bell (MAB). technology that provides quicker throttle response and substantially improved torque and horsepower.
Designed and built in the U.S.A.

Part #: DS1800-0430 - For 06/07 Dyna (dual O2 sensor ports) ... $623.66 including shipping*

Please note: These are special order items. While most items ship the same or next business day, these items will take a few extra days to ship. No express delivery is available. No returns on Special Order items.

SEE EXHAUST SECTION FOR OTHER APPLICATIONS.

FOR CUSTOM EXHAUST SECTIONS ('BUILD YOUR OWN'), INSULATING WRAP, HI-HEAT SPRAY, UNIVERSAL HEAT SHEILDS (including 'Flame' style!), ETC. GO TO EXHAUST ACCESSORIES.

If you need hardware for these pipes, give us a call to order everything at once. This will save you extra shipping charges. Thanks!