Steel Thunder Custom Cycles motorcycle parts

 

Shopping Pages:

Control Section:

Brakes, discs, rotors, dashes & instrument panels, gauge brackets, footpegs, forward controls, grips, throttle control, handlebar controls, handlebars, levers, linkage, levers, mirrors, risers, shift & jockey control.

Drivetrain Section:

Belt drives, belt drive covers, clutch kits, chain drives, drivetrain packages, kick start transmission, offset sprockets, points, derby & ignition coves, primary belts, primary chains, primary covers, pulley & brake combo kit, rear drive belts, Sportster performance parts, six speed conversion, rear sprockets, rotors, transmissions & parts.

Electrical Section:

Battery related, battery tenders, charging systems,coils & mounts, dash/instrument panels, speedos, tachs, terminal kits, electronic ignitions, handlebar switches, headlights, horns, lighted license plate mounts, lighting, starter motors, taillights, turn signals, wiring harnesses.

Engine Section:

Motorcycle engine parts, drivetrain packages, cams & cam side parts, big bore kits, big bore piston kits, Sportster engine parts, motor mounts, drivetrain section, engine mounts.

Exhaust Section:

Exhaust pipes listed by model, exhaust accessories, insulating wrap, mufflers, extensions, high heat spray, heat shields, clamps and mounts.

Frame/Body Section:

Frames listed by style, engine mounts, fenders, struts, floorboards, foot rests, pegs, frame covers, hardtails, highway bars, kickstands, lowering kits, seats listed by model, shocks, sissy bars & pads, swingarms.. Also, Rolling Chassis Kits.

Front End Section:

Complete front fork assemblies, fairings & fairing accessories, fork brackets/triple trees, fork tubes, sliders, fork legs, boots, springer front ends & parts, wide glide kits.

Fuel Section (Gas, Oil, Air):

Air cleaners & covers, breathers, carburetors & rebuild kits, fuel injection control, gas tanks, gas caps, gas tank cleaner/prep systems, oil, oil coolers, oil line kits, oil pressure & tank gauges, oil pumps, oil tanks, , velocity stacks.

Saddlebag & Windshield Section:

Saddlebags listed by manufacturer, windshields

Wheel Section

Tires,  tire size chart, 40, 60 & 80 spoke wheels, solid wheels.

General Merchandise Section:

Catalogs, covers, gift certificates, gift suggestions, goggles & eyewear, hardware, luggage racks, motors, motorcycle covers, security, locks & alarms, tools, trailer accessories, ramps, wheel chocks, trailer hitches to put on motorcycle.

Other Pages:

Fun, Photos & Links Section:

Photos of our customer's motorcycles, including bike kit builds, trike build link, free biker ecards, jokes, banner links, text links, link to us, webmaster's awards.

Tech & Info Section

Tech tips, tire size chart, engine break-in, suspension & shocks info, rake and trail calculator, contact page, frequently asked questions (FAQ), our credentails, terms & conditions of sale, disclaimer, international shipping policy.

Secured by SSL - an authentic COMOCO site.

 

link

 

 

 

Thank you for shopping at Steel Thunder Custom Cycles!

NEW FLAT RATE SHIPPING!  No hidden fees and NO TAX! Only $12.95 in the continental. U.S., no matter how large (or heavy) your order is!  Save $$$ ... order everything you need NOW! 

Sitemap and Search Home Page Contact Us Sportster Section Catalogs

 Exhaust Clamps, Straps, Brackets, etc.

Please Note: Our minimum order is $35.00 total. Take advantage of our low Flat Rate Shipping and order everything you need now!

Don't see what you need? Have questions? Call us! Or write.

Mounting Bracket for Dyna exhaust. MOUNTING BRACKETS FOR BIG TWIN OE EXHAUST

Black Finish
Fits Dyna models 1995/Later. Fits all Cycle Shack exhaust used on 1991/1994 DYNA models 90119, 90160 & 90153. Use a stock style replacement on Dyna models 1995/2005.
Replaces HD#65674-95 - Part#:M95414 ... $38.50
Mounting Bracket for Shovelhead custom exhaust
MOUNTING BRACKETS FOR SHOVELHEAD CUSTOM EXHAUST

Shovelhead 1970/Later. Fits Cycle Shack Drag Pipe Sets M90060 and M90159 and Dual Exhaust System M92085 and POWER HOUSE M90167 and M90175. FX Models 1971/1984 & FXWG Models 1980/1982. Fits Cycle Shack Drag Pipe Sets M90004, M90009, and M90157 and Dual Exhaust Systems M91113, M91130, M92011, M92013, M92047 and M92048.
Part #: M95026... $35.00
Mounting Bracket for Shovelhead custom exhaust.
MOUNTING BRACKETS FOR SHOVELHEAD CUSTOM EXHAUST

Shovelhead 1970/Later. Fits Cycle Shack Drag Pipe Set M90003 and POWER HOUSE M90166. Part #:M95029 ... $35.00
Exhaust Mounting Bracket for Sportster 1980/Later
MOUNTING BRACKET FOR SPORTSTER OE EXHAUST

Part #: M95418 - Chrome plated. Fits Sportster Models 1980/Later. Note: Will not fit 883R 2002/Later. ... $32.75
Footboard Bracket for FLH custom exhaust systems
FOOTBOARD BRACKET FOR FLH MODELS

Use to replace right factory footboard mount if you want to retain footboards on an FLH custom exhaust systems.
Sold each
.
Cadmium Plated Footboard Bracket. Fits FLH models 1970/1984.
Part #: 95001 .. $9.60

Footboard Bracket for adding Paughco exhaust to  FLH
Footboard Bracket - Use this bracket to replace right side footboard mount to retain footboards on FLH when using Paughco exhaust system.  Part#: M95410 - Sold each ... $31.35

Exhaust pipe and muffler clamp for H-D style motorcycles.

Please Note: Our minimum order is $35.00 total. Take advantage of our low Flat Rate Shipping and order everything you need now!

EXHAUST END CLAMPS FOR PIPES AND MUFFLERS - American Motorcycle Hardware

High quality clamps made of 1/8" thick cold rolled steel 3/4" wide. Use with brackets to fasten exhaust pipes securely to frame or to secure mufflers to exhaust pipes. Made in the U.S.A.

Part#:M98010 - 1-3/4 I.D. ... $6.89 .SOLD EACH.

Part #: M98011  - 1-7/8" I.D. ... $6.80 .SOLD EACH.

Part#: M98012 - 2" I.D. ... $6.80 .SOLD EACH.

MU95505

Paugcho univrsal muffler clamps.

MU95506

Please Note: Our minimum order is $35.00 total. Take advantage of our low Flat Rate Shipping and order everything you need now!

CHROME UNIVERSAL CLAMPS FOR MUFFLERS - Paughco

These chrome plated muffler clamps are designed to do the job. Extra heavy metal with heavy duty mounting hardware included. Buy these with confidence.Fits 3" O.D. Mufflers Extra thick metal with 5/6" hardware included. Made in the U.S.A.

Part #:M95505 - 3" I.D. ... $11.25. SOLD EACH.

Part#: M95506 - 3" I.D. (longer tail)... $21.63. SOLD EACH.

Side mount exhaust pipe clamp for all models.

Please Note: Our minimum order is $35.00 total. Take advantage of our low Flat Rate Shipping and order everything you need now!

SIDE MOUNT EXHAUST PIPE CLAMP FOR ALL MODELS - Cycle Shack

This heavy duty chrome plated steel Exhaust Clamp measures 1" wide and is 1/8" thick.
Flat side of clamp allows flush mounting.
A 5/16" Grade 5 bolt and nut included.
Chrome Plated. Made in the U.S.A.

Part #: M98028 - Fits 1-3/4" O.D. exhaust pipes
... $8.95 SOLD EACH.

Motorcycle Muffler Clamps for heavy FL style mufflers.

Please Note: Our minimum order is $35.00 total. Take advantage of our low Flat Rate Shipping and order everything you need now!

MUFFLER CLAMPS - V-Factor

These High Quality Muffler Clamps are designed to support heavy FL style mufflers. Highly Polished Stainless Steel. Sold each.

Part #: M95529 - Stainless Steel 3 1/4" I.D. Stock Style Muffler Clamp, 1" Wide x .095" thick without Bolt. Requires 5/16" bolt and nut. Fits 3 1/4" O.D. mufflers ... $10.75

Exhaust port clamps for Panhead and Ironhead Sportster.

 

Please Note: Our minimum order is $35.00 total. Take advantage of our low Flat Rate Shipping and order everything you need now!

SUPER EXHAUST PORT CLAMPS FOR PANHEAD & IRONHEAD SPORTSTER - V-Factor

These Exhaust Clamps add the finishing custom touch while insuring unmatched, super-sealing exhaust port connections. Made from heavy 1/8" wall cold rolled steel. Chromed allen head bolts feed into barrel type pre-threaded nuts which are heli-arc welded to clamps. Two different pairs are sold to fit Panhead 1948/1965 and Ironhead Sportster 1957/Later. Chrome Plated. Sold in packages of 2.

Part #:M98008 - Panhead ... $17.85 Select quantity of "1" to get 2 clamps with hardware.

Part#: M98007 - Ironhead Sportster ... $16.25 .Select quantity of "1" to get 2 clamps with hardware.

Universal motorcycle p-clamp for exhaust pipe installation.

Please Note: Our minimum order is $35.00 total. Take advantage of our low Flat Rate Shipping and order everything you need now!

UNIVERSAL P CLAMPS FOR EXHAUST PIPES - American Motorcycle Hardware

Help simplify custom exhaust installation with our Universal Fit P Clamps. The slotted tail measures 5" long allowing for plenty of adjustment. P clamps measure 1/8" thick by 1" wide and are designed to be used with 5/16" mounting hardware. Made in the U.S.A.

Part #: M95520 - 1 3/4" I.D. ... $8.80 SOLD EACH.

Part#: M95521 - 2" I.D. ... $8.80 SOLD EACH.

Motorcycle exhaust clamp with strap.

Please Note: Our minimum order is $35.00 total. Take advantage of our low Flat Rate Shipping and order everything you need now!

CLAMP WITH STRAP FOR EXHAUST PIPES - V-Factor

1 3/4" I.D. High quality heavy duty chrome plated steel clamp with attached 5 3/4" mounting strap. Without mounting bolt hole. Includes hardware. Fits 1 3/4" O.D. Pipes.

Part #: M98014 ... $6.50 .SOLD EACH.

Flat Straps for all exhaust systems.

Please Note: Our minimum order is $35.00 total. Take advantage of our low Flat Rate Shipping and order everything you need now!

HARDWARE UNIVERSAL FLAT STRAPS FOR ALL EXHAUST SYSTEMS - American Motorcycle Hardware

Hole measurements are from center to center.
5/16" bolt holes are 3/4" wide x 1/8" thick. Made in the U.S.A.

Part #: M95006 - Chrome Plated Strap with holes at 3" centers ... $3.49 SOLD EACH.

Part #: M95009 - Chrome Plated Straps with holes at 6" centers ... $6.95 SOLD EACH.

Offset Strap to mont motorcycle exhaust or anything else!

Please Note: Our minimum order is $35.00 total. Take advantage of our low Flat Rate Shipping and order everything you need now!

OFFSET EXHAUST STRAP TO MOUNT ANYTHING - Cycle Shack

Can be used for mounting anything to anything. 3" overall length, approximately 2" between holes, and a 3/8" standard offset. Hole for 3/8" bolts. Made in the U.S.A.
Part #: M95010 - offset strap ... $6.25 SOLD EACH.

T-Bolts for Channel Mount motorcycle exhaust.

Please Note: Our minimum order is $35.00 total. Take advantage of our low Flat Rate Shipping and order everything you need now!

CHROME PLATED T BOLTS FOR CHANNEL MOUNT EXHAUST - V-Factor

Studs measure 5/16-18 x 1" long
T plates measure 1 1/2" long x 5/8" wide
Includes two T bolts and two nuts with integrated lock washers
Fits hidden channel mount exhaust systems

Part #: M95118 -T-Bolts & Nuts (2 ea.) ... $5.99  Select quantity of "1" to get 2 T-bolts with hardware.

Motorcycle Exhaust Pipe Clamp and Retaining Ring for Big Twin and Sporster Evo and Twin CamPlease Note: Our minimum order is $35.00 total. Take advantage of our low Flat Rate Shipping and order everything you need now!

EXHAUST PIPE CLAMP & RETAINING RING FOR BIG TWIN AND SPORTSTER EVOLUTION & TWIN CAM -

Complete Kit (2 V-FACTOR Chrome Plated Exhaust Pipe Clamps & 2 AMERICAN MOTORCYCLE HARDWARE Retaining Rings)
Fits Big Twin Evolution 1984/1999, Twin Cam 1999/2009& Sportster Evolution 1986/2009.
(Replaces HD# 65184-02 & 65325-83)

Part #: M95107 ... $21.05.Select quantity of "1" to get 2 clamps with 2 retaining rings.

Don't see what you need?  Contact us.  Chances are we have it.  We have thousands of parts that are not shown online.

PLEASE NOTE: We Do NOT Backorder. If your item is not in stock, you will be notified and given a refund.

15 Percent Coupon, summer promo, Beer Machine

FLAT RATE SHIPPING APPLIES IN CONTINTENTAL 48 UNITED STATES ONLY. AK, HI and APO/FPO will have additional shipping fees. We ship within the U.S.A. and to APO/FPO (military addresses; weight and size restrictions apply.). We do not accept foreign credit cards. Please see our CONTACT page for more information.

Prefer to call in your order to Steel Thunder? Call 603-237-8200.

FREQUENTLY ASKED QUESTIONS

Please note that all prices are subject to change.

***

Steel Thunder Custom Cycles

531 Bungy Road

Columbia, NH 03576

Copyright 2002-2013 Steel Thunder Custom Cycles©

 

Thank you for shopping at Steel Thunder Custom Cycles online motorcycle parts store!

 

 

 

Protected by Copyscape Duplicate Content Detection Software